歡迎使用新版搜尋工作頁

1111幫您照顧找工作時的眼睛新改版為您放大字體,讓您閱讀起來更舒適!

新功能介紹

個人化條件設定

點擊展開更多,可依照個人喜好,一次設定多種條件,讓你更精準找到理想的工作。

1/4

貼心列出熱門關鍵字

一鍵點擊,即可幫您快速篩選適合您的職缺!

2/4

收藏工作好輕鬆

看到喜歡的職缺時,只要點擊左上方的愛心,就能馬上幫您收藏工作唷!

3/4

精選夢幻工作環境

推薦擁有優質工作環境的職缺,舒適優美的辦公室讓您上班更有活力

目前位置:1111人力銀行找工作Quality Engineer搜尋結果
    將搜尋範圍從「職務名稱」擴大至職務說明與公司或品牌名稱!
    將搜尋範圍從「公司名稱」擴大至公司簡介與產品或公司福利!

當您接獲1111的工作機會簡訊,請直接輸入簡訊提供的職缺代碼,即可立即應徵!

  • 更新時間
  • 工作性質
  • 工作經驗
  • 學歷要求
  • 工作待遇
  • 資本額
  • 員工人數
  • 福利制度
更新時間
工作經驗
學歷要求
工作待遇
  • 元-
工作時段
休假制度
外語需求
更多條件
資本額
員工人數
福利制度
進階搜尋收起選單
目前排序:
每頁顯示:顯示方式:摘要列表

(共123筆)

  • WIH170310-Service Quality Engineer

    新竹市東區面議
    面議/1年工作經驗以上/大學

    1. Co-work with MFG to settle quality requiement 2. On-site support for project 3. Build site quality system for ISO and for the customer 4. Customer compliant handling 5. Quality improvement driving

    新竹市東區
    我要應徵
    2018-01-22
  • Quality Engineer/品質工程師

    台中市大里區面議
    面議/2年工作經驗以上/大學

    1. 品質系統維護更新, 相關數據分析 2. 品質異常處理 3. 客訴案件處理,提出矯正預防措施 4. 新專案品質相關問題參與 5. 材料及有毒物質檢驗報告 6. 供應商溝通協調

    台中市大里區
    我要應徵
    2018-01-22
  • Quality】Component System Engineer (Senior) - 1702153

    新北市汐止區面議
    面議/10年工作經驗以上/大學

    1. HDD and SSD quality process management and improvement. 2. Manage/improve key component quality index VLRR/AFR/PAFR/MDA/TIF. 3. Analyze quality trends, identify and develop corrective/preventive action plans. 4. Review customer complaint to work out root cause and implement corrective actions. 5. Conduct QPA & QSA, analyze audit findings and close critical findings to prevent potential quality issue. 6. Support new product introduction process, especially system integration related issues for both mechanical structure and EE signals. 7. Work with RD team to review vendor’s failure analysis and create/maintain component validation test criteria. And create/maintain QPA from critical issues lessons leant. 8. Drive key component vendor’s CIP project to improve quality index and reduce variation.

    新北市汐止區
    我要應徵
    2018-01-21
  • QA品保工程師 Quality Assurance Engineer

    台北市南港區面議
    面議/5年工作經驗以上/專科

    工作內容 (Responsibilities and Duties) 1. 主辦擬案撰寫 ISO 各階文件活動推行 Responsible for writing draft ISO documents and implementation of quality system. 2. 協助處理專案各個階段品質保證工作 (如量產專案的設計變更管制、新產品專案的設計管制) Handle quality related issues during each stage of the project (e.g. change control for mass production and design control/document review for new product). 3. 處理產品開發設計變更管制確效活動 Coordinate/evaluate and handle validation activities of new product development and change control process (including plan, protocol, execution and report). 4. 產品執行風險管理分析與可靠度驗證 Assist to perform risk management and assessment of new product project (e.g. FMEA and post-market surveillance) and reliability tests. 5. 使用統計分析與品質手法來解決問題 Be able to solve product issues by using quality statistical analysis and tools. 6. 供應商稽核以符合客戶與法規的要求 Execute supplier audits to comply with customer and regulatory requirements. 7. 實施矯正與預防措施來糾正品質缺陷 (產品和品質保證體系中) Implement corrective actions to remedy quality deficiencies (in products and QA systems). 8. 在指定的時間內自主完成指派的工作 Complete assigned tasks on time with minimal supervision.

    台北市南港區
    我要應徵
    2018-01-22
  • QC-研發品保工程師 Design Quality Engineer

    新北市深坑區面議
    面議/4年工作經驗以上/專科

    a)可靠度測試 b)英文報告撰寫 c)客訴處理 d)國外出差

    新北市深坑區
    我要應徵
    2016-11-07
  • Senior Quality Manager

    上海市面議
    面議/10年工作經驗以上/大學

    Job Summary Build up and maintain system, standard and procedure at site includes all the functions, operation and strategic suppliers, enable site to cope business growth and satisfy customer totally in TQCS (Technology, Quality, Cost, and Supply). Job Responsibilities 1. To establish and maintain site quality and management system, and ensure compliance with Hi-P corporate wide management system requirement. 2. To build up and manage quality organization, competence development and quality trainings implementation. 3. To provide total customer satisfaction in terms of TQSC. 4. To implement and manage Product Quality Planning. 5. To manage Supplier Quality. 6. To manage Quality related KPI and drive for continuous improvement. 7. Ensure Quality performance and Management System compliance by audit, and follow up with corrective and preventive actions. Job Requirement 1. College with bachelor degree or above, DI / Engineer. 2. Experience in the industrial filed > 5 years. 3. Experience as senior management > 3 years.

  • presales engineer

    台北市中正區月薪 40,000~80,000元
    月薪 40,000~80,000元/5年工作經驗以上/大學

    Job Description: l In charge of Taiwan & ACAP pre-sales and technical service & solution support l Work with client by nurturing business relationships with clients, understanding their business needs, mapping customer requirements and present company product and solutions, offering solutions for technical supports. l Update of technical documentation: Manual, FAQ, etc. Qualifications: l 5-8 years‘ experience in Pre-Sales or technical support field l Capable in creating job protocol and has flexibility to work in the start-up situation. l Experience at least in one of below area -AI -Network security -Android smartphones (ARM architecture) l At least Four-year college degree from an accredited institution in relevant fields l English fluently spoken/listened/written/read l Commercially astute, strong sales presentation skills, persuasive and influential l A team player with leadership quality, excellent communication, analytical, negotiation and interpersonal skills.

    台北市中正區
    我要應徵
    2018-01-24
  • Service Engineer

    上海市面議
    面議/經驗不拘/學歷不拘

    • To be responsible for post sales services of Eppendorf lab products • Conduct on-site installation and follow testing procedures to ensure proper working order • Troubleshoot among a wide range of technical problems and issues, determine technical solution and repair with quick speed • Conduct on-site services including but not limited to scheduled preventive maintenance, calibration, IQ/OQ etc • Provide training for customers and users on basic product use and maintenance • Promote the sale of designated service products in order to meet budgeted and associated service and sales goals • Cultivate and develop positive working relationships with customers and sales team • Provide feedback on epidemic technical issues to product quality teams • Provide appropriate input in writing, updating and correcting various product documentation • Provide input for various reports including identifying and isolating unique problems • Work with Finance team to ensure timely collection of accounts receivables related to service activities • Further tasks on request • Routinely requires extensive or overnight travel on short notice within or sometimes beyond defined territory or routine business hours to support customer and/or company service needs

  • [107年度研發替代役]Image quality software engineer (影像品質軟體工程師)-J01355

    新北市新店區面議
    面議/經驗不拘/碩士

    Auto focus algorithm development自動對焦演算法開發 Auto exposure algorithm development自動白平衡演算法開發 Auto white balance algorithm development 自動曝光演算法開發 Image quality related control flow integration 影像品質相關控制流程整合 Location: Taiepi、Taoyuan

    新北市新店區
    我要應徵
    2017-12-20
  • 供應鏈品質管理師-SQE(Supplier Quality Engineer)

    基隆市七堵區面議
    面議/3年工作經驗以上/大學

    1.負責新材料、新產品、新加工廠或供應商的找尋及開發。 2.參加營業主導的市場開發專案,負責產品開發及驗證、生產。 3.建立相關生產管理品質體系,並執行: 3-1.確立生產條件與SOP 3-2.建立可追溯體系 3-3.出貨、驗收、品質保證及異常矯正措施。 4.執行ERP所要求的採購、開發、品保系統流程與資料維護。

    基隆市七堵區
    我要應徵
    2018-01-24
  • QA Engineer 測試工程師

    台北市內湖區面議
    面議/3年工作經驗以上/學歷不拘

    1. 軟體/ 行動裝置/ 網頁之測試。 2. 根據負責測試的系統模組與內容,撰寫測試計畫與測試案例。 3. 了解平台及遊戲內容,尋找遊戲Bug及錯誤,並須確認及提供問題重現流程。 4. 追蹤問題處理狀況,直至問題修復或改善。 5. 撰寫/使用自動化測試短體,將費時費力的測試案例自動化,定時執行,以減少人力浪費。 6. 設計與維護測試框架,確保test code的quality跟maintainability,避免fragile test。

    台北市內湖區
    我要應徵
    2018-01-24
  • Project Engineer/專案工程師

    台中市大里區面議
    面議/5年工作經驗以上/大學

    1.Lead the engineering project from plan, cost, and procedure to production to complete the project on time. 2.Provide engineering/technical support for mature existing product line. 3.Cross function coordination between Engineering, Marketing, Operations, and Quality etc., to assign different duties such as design, manufacturing, testing and producing based on Milestone process project management. 4.Will assume total product responsibility for a number of products. 5.Work with Marketing on the project proposal, create and maintain FAR spending, control unit costs on target. 6.Supervise engineering design, Lab, ME, Production and vendor to complete all deliverables. 7.Works closely with Marketing, Operations and suppliers 8.Create and Manage throughout the whole Milestone process. 9.Good understanding in different manufacturing process, such as stamping, ejection, die casting…etc 10.Organize and supervise testing of components and products. 11.Daily communications with US and worldwide team.

    台中市大里區
    我要應徵
    2018-01-22
  • *Application Engineer 軟體工程師

    台中市大雅區面議
    面議/經驗不拘/大學

    Requires knowledge and experience in own discipline; still acquiring higher-level knowledge and skills. Builds knowledge of the company, processes and customers. Solves a range of straightforward problems. Analyzes possible solutions using standard procedures. Receives a moderate level of guidance and direction. Key Responsibilities : 1. Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of moderate scope under general supervision 2. Perform basic engineering analysis under general supervision 3. Perform and generate basic engineering test reports under general supervision 4. Generate related alpha/gamma documentation for product release 5. Coordinate the procurement and assembly of electrical/electronic components/equipment and identify sources of critical parts and subsystems to resolve technical issues 6. Troubleshoot a variety of moderately complex electrical problems 7. Implement concepts for product issues and electrical solutions of moderate difficulty 8. Assist in development of electrical product specifications Functional Knowledge : • Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities Business Expertise : • Understands key business drivers; uses this understanding to accomplish own work Leadership : • No supervisory responsibilities but provides informal guidance to new team members Problem Solving : • Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents Impact : • Impacts quality of own work and the work of others on the team; works within guidelines and policies Interpersonal Skills : • Explains complex information to others in straightforward situations

    台中市大雅區
    我要應徵
    2018-01-23
  • Supply Chain Engineer - Electronics

    桃園市龜山區面議
    面議/7年工作經驗以上/碩士

    Within the project the SCE is the primary responsible to ensure parts quality from our suppliers. Using your in-depth technical knowledge, analytic thinking, political antenna and excellent people skills, you work closely with suppliers to build up an intimate knowledge of their IP and technological capabilities. The main responsibilities are: • Early supplier involvement in the D&E project to secure that technology expertise of ASML and supplier are merged in the best way. • Ensure that not only parts quality, however, also manufacturability and serviceability aspects are covered in the design phase. • Document the D&E project collaboration, including supplier & ASML responsibilities and roles via a Statement of Work (SoW). • New product introduction (NPI) and supplier selection. • Deliverables that secure parts quality from suppliers in the ASML product generation process, such as: - Acceptance of the design and/or specification o Complete & detailed parts qualification process - Acceptance of qualified parts - Process flow and Process failure mode effect analysis - First article inspection • Define and maintain supplier interface processes, such as: - Issue resolution - Qualification deviation - Configuration management - ASML factory disturbances • Contribute to supplier development to improve operational excellence by driving execution of existing agreements, improvement actions, and participation in supplier audits. The SCE is part of the D&E project team and, therefore, interfaces with project leaders, design engineers, architects, manufacturing & customer support engineers, logistics, procurement, etc. The core competencies are: • Production process qualification for R4V of mains products (PFMEA) • Manufacturing conform standards (UL508A). • Process to maintain and improve products-SPC • Ability to added value testing strategy (zero NFF) • Supply chain management / highest reliability • Technology leadership for the specific (mains)product • Technology competence/Technical Dev.Comp.(incl. EOL) • Able to review designs according to standardizations (UL, IEC and SEMI) with electric rack and cabinet knowledge and qualification experience.

    桃園市龜山區
    我要應徵
    2018-01-23
  • Field Applications Engineer (Hsinchu)

    新竹市東區面議
    面議/3年工作經驗以上/大學

    • Help new Application Product business development include bridging D&E idea and customer requirement/demand. • Familiar with litho-process, scanner & metrology mechanism • Able to understand customer’s needs and clearly describe the issues that customer is facing. • Act as the owner of customer requests and follow through. (customer interfacing, data collection, 1st hand analysis, etc) • Escalate/Communicate the issues to ASML VHN experts when needed without losing the ownership. Drive for progress and containment/solution • Able work and coordinate across departments to ensure smooth troubleshooting process • Able to present and report clearly during internal and external meetings.

    新竹市東區
    我要應徵
    2018-01-23
  • Field Applications Engineer (Taichung)

    台中市西屯區面議
    面議/3年工作經驗以上/大學

    • Help new Application Product business development include bridging D&E idea and customer requirement/demand. • Familiar with litho-process, scanner & metrology mechanism • Able to understand customer’s needs and clearly describe the issues that customer is facing. • Act as the owner of customer requests and follow through. (customer interfacing, data collection, 1st hand analysis, etc) • Escalate/Communicate the issues to ASML VHN experts when needed without losing the ownership. Drive for progress and containment/solution • Able work and coordinate across departments to ensure smooth troubleshooting process • Able to present and report clearly during internal and external meetings.

    台中市西屯區
    我要應徵
    2018-01-23
  • Field Applications Engineer (Tainan)

    台南市新市區面議
    面議/3年工作經驗以上/大學

    • Help new Application Product business development include bridging D&E idea and customer requirement/demand. • Familiar with litho-process, scanner & metrology mechanism • Able to understand customer’s needs and clearly describe the issues that customer is facing. • Act as the owner of customer requests and follow through. (customer interfacing, data collection, 1st hand analysis, etc) • Escalate/Communicate the issues to ASML VHN experts when needed without losing the ownership. Drive for progress and containment/solution • Able work and coordinate across departments to ensure smooth troubleshooting process • Able to present and report clearly during internal and external meetings.

    台南市新市區
    我要應徵
    2018-01-23
  • Field Applications Engineer (Linkou)

    桃園市龜山區面議
    面議/3年工作經驗以上/大學

    • Help new Application Product business development include bridging D&E idea and customer requirement/demand. • Familiar with litho-process, scanner & metrology mechanism • Able to understand customer’s needs and clearly describe the issues that customer is facing. • Act as the owner of customer requests and follow through. (customer interfacing, data collection, 1st hand analysis, etc) • Escalate/Communicate the issues to ASML VHN experts when needed without losing the ownership. Drive for progress and containment/solution • Able work and coordinate across departments to ensure smooth troubleshooting process • Able to present and report clearly during internal and external meetings.

    桃園市龜山區
    我要應徵
    2018-01-23
  • QX-QA Senior Engineer

    新北市深坑區面議
    面議/5年工作經驗以上/大學

    1.To do planning and performing quality & reliability test 2.To co-work with factory and supplier to improve process and material quality 3.Continue to improve field quality and customer satisfaction

    新北市深坑區
    我要應徵
    2016-11-07
  • SQE Engineer(3000982)

    桃園市八德區面議
    面議/3年工作經驗以上/大學

    職責要求 1.Quality engineer with STA experience dealing within the supply chain to provide support to the Commercial Team and Quality Department in relation to supplier development, supplier quality management, internal quality audits and NPI. 2.Validate PPAP submission from supplier., ie interact with vendors to complete their PPAP submissions. 3.Coordinate with Materials and Production departments to insure effective, on-time, implementation of engineering changes. 4.Champion and monitor supplier key deliverables per control plan. 5.Ensure safety of the incoming/raw materials. 任職資格 工作經歷:3年以上 學歷要求:大學、碩士 科系要求:工程學科類 語文條件:英文聽說讀寫精通 其他條件: 1.Very good time management 2.Target oriented business drive 3.Winning approach: ability to learn fast and detail orientated

    桃園市八德區
    我要應徵
    2017-12-30
  • Supply Chain Engineer - Mechatronics

    桃園市龜山區面議
    面議/5年工作經驗以上/大學

    Within the project, the SCE is the primary responsible person to ensure parts quality from our suppliers. Using your in-depth technical knowledge, analytic thinking, political antenna and excellent people skills, you work closely with suppliers to build up an intimate knowledge of their IP and technological capabilities. The main responsibilities are: • Early supplier involvement in the D&E project to secure that technology expertise of ASML and supplier are merged in the best way. • Ensure that not only parts quality, however, also manufacturability and serviceability aspects are covered in the design phase. • Document the D&E project collaboration, including supplier & ASML responsibilities and roles via a Statement of Work (SoW). • New product introduction (NPI) and supplier selection. • Deliverables that secure parts quality from suppliers in the ASML product generation process, such as: - Acceptance of the design and/or specification on Complete & detailed parts qualification process - Acceptance of qualified parts - Process flow and Process failure mode effect analysis - First article inspection • Define and maintain supplier interface processes, such as: - Issue resolution - Qualification deviation - Configuration management - ASML factory disturbances • Contribute to supplier development to improve operational excellence by driving execution of existing agreements, improvement actions, and participation in supplier audits. The SCE is part of the D&E project team and, therefore, interfaces with project leaders, design engineers, architects, manufacturing & customer support engineers, logistics, procurement … etc.

    桃園市龜山區
    我要應徵
    2018-01-23
  • IP Database Management Engineer

    新竹市東區面議
    面議/經驗不拘/大學

    1. Responsible for outsourcing IP design database management 2. Responsible for Outsourcing IP design quality check utility management 3. Responsible for Outsourcing IP management system flow development 4. Responsible for NVUM IP Information Maintain and Spec Support

    新竹市東區
    我要應徵
    2018-01-22
  • Assembly Engineer-Linkou Factory

    桃園市龜山區面議
    面議/經驗不拘/大學

    -Assemble and test complex systems in a clean room environment. -Support process improvements, Engineering testing, Lean Manufacturing and Quality improvements -Train and mentor others -Quality: produce products in accordance with established specifications. Observe and report about regular and/or on-going problems that occur in the construction of products or their operation. Give support to the solution of these problems. Contribute to the improvement of products and processes. -Production: manufacture and deliver high level, complex systems according to the established procedures. Solve any technical problems that occur. Set an example to other members of the team. Oversee the total process from assembly through to test and act as a reference source for problem solving in the area of expertise; -New products: actively contribute to the pilot production process and the transition to volume production. Support for the development and improvement of TPD, processes and records and other relevant topics. Before the implementation of new procedures, investigate what their impact will be on the production process. Come up with constructive ideas for product improvement; Skills: acquire sufficient knowledge of new and established products and processes, modifications, sub-modules and complete systems. Have an in-depth knowledge of the correlation between the module and the whole system and the relationship with other (sub) systems. Pass on relevant expertise; -Teamwork: support good teamwork by the search for solutions and ideas arising from input and the implementation of departmental tasks. Planning: coordinate the activities given in the production plan and monitor the practical situation. Closely control the use of tools, materials and equipment;

    桃園市龜山區
    我要應徵
    2018-01-23
  • Mechanical Engineer- Shanghai

    上海市面議
    面議/5年工作經驗以上/大學

    NPI Mechanical Engineer Job location: Shanghai Job Summary The Mechanical Engineer role will be located in Shenzhen, China. Key Qualifications BS degree in ME and 5+ years of experience in issue debug. Proficient in written and verbal English. Be able to work independently under high pressure and tight schedule. Hands-on experience and good understanding on: Mechanical design review Assembly fixture development Key process parameter DOE validation Auto-assembly equipment development Yield improvement Product characterisation Description Communicate with OEM and R&D regarding design/production issues. Work closely with PD and oversee all mechanical issues. Review OEM production line readiness and document of PMP/SOP Review the following items during NPI phases: Review design readiness Assembly fixture and equipment development Key process parameter DOE validation Quality issue and Yield rate improvement Failure analyse and provide solution Review the following items in MP phases: Quality issue and Yield rate improvement Failure analyse and provide solution Lesson learn and knowledge maintain Education Bachelor degree

  • Software Development Engineer (RD)

    新竹市東區面議
    面議/5年工作經驗以上/碩士

    Job Duties: 1. The person will contribute to the infrastructure, design, implementation and verification of the software in a team whose job is to develop the next generation of model extractor. 2. This work includes drafting technical specifications, design documents, algorithmic descriptions and test plans. 3. This will be carried out in close collaboration with other teams abroad. 4. Provide internal technical support to customer‘s request.

    新竹市東區
    我要應徵
    2018-01-04
  • MPS System Install Engineer

    桃園市龜山區面議
    面議/1年工作經驗以上/大學

     Install ASML equipment  Evaluate and diagnose problems and make appropriate repairs  Acquire sufficient knowledge of new and established products and processes  Analytical Thinking | Provide the information to enable effective trouble shooting  Helicopter-view | Anticipate on possible issues on the progress of the install  Quality Control | Closing the Improvement loop regarding product quality & design  Ambassador role | represent ASML at the customer’s site in a professional way  Communicative Skills | Handle customer matters & request in a professional way  Knowledge sharing | Be the source for actual technical knowledge of new and existing products  Clear Reporting | Written technical reports on daily base to various stakeholders in organization  Awareness of usage of high cost tools, materials and equipment  Work with co-workers (subcontractors, agents), customer & local field support , factory install engineers  Ability to analyze, concentrate and structure  To be service minded, to have good communication skills, to be a teamworker

    桃園市龜山區
    我要應徵
    2018-01-23
  • Senior Infrastructure Engineer

    澳門特別行政區面議
    面議/經驗不拘/學歷不拘

    Job Description: • Maintain and monitor all network, security and computer systems to meet the organization‘s current and future requirement • Responsible for management, maintenance and architecture of storage, virtualized environment, servers, network devices, and productivity tools • Monitor systems and identify performance issues • Test all changes to networks, hardware, software and hosted applications •Monitors service delivery compliance to budget, quality standards and customer and business stakeholder requirements •cater to do infrastructure coordination related to design and setup activities at different stages of a project •interact, coordinate and maintain good working relationship with vendors, suppliers, distributors and contract consultants Job requirement •Bachelor degree in computer science or above or related areas •minimum 3 year experiences in infrastructure networks, hardware, software and telecommunications •minimum 5 year experiences in operating in gaming industry/environment •solid knowledge of microsoft active directory, exchange and SQL server, VM Ware, Hyper-V, Citrix Xen App and NetScaler •Experience in troubleshooting, virtualization, storage, automated monitoring tools and network security

    澳門特別行政區
    我要應徵
    2018-01-24
  • Mobile Software Engineer

    新加坡月薪 80,000元
    月薪 80,000元/2年工作經驗以上/大學

    1.從事手機軟體的程式設計、修改、安裝、測試及維護 2.確認軟體程式的目的與功能,進行程序開發及測試,並撰寫軟體程式技術白皮書 3.從事相關系統程式開發、管理與維護,及客戶服務與支援 4.必須與設計團隊合作開發實用及美觀的手機應用。 - Develop, deliver and maintain high quality code and documentation for mobile applications - Work closely with design team to produce intuitive and beautiful mobile applications

  • DFT Engineer (台北)

    台北市內湖區面議
    面議/經驗不拘/大學

    ※工作內容 1.Implementing DFT structure for digital logic/Memories/IPs. 2.Involve in ensure total silicon quality coverage both in design phase and production phase. 3.EDA development for logic design flow and DFT flow. 4.ATE test program development.

    台北市內湖區
    我要應徵
    2018-01-16
  • DFT engineer - Scan (新竹)

    新竹市東區面議
    面議/2年工作經驗以上/碩士

    Required : Knowledge of Scan. Synopsys scan implement experience. Familiar with STA / Simulation ... other verification flow. Proficient in programming skill and UNIX shell. 2+ year. Plus : Involve in ensure total silicon quality both in design phase. Scan diagnosis and ATE test debug experience. Compression / Share code / Ultra flow implement experience. Familiar with Verilog/RTL. Low power DFT design implementation / verification.

    新竹市東區
    我要應徵
    2018-01-16
  • Frond End Engineer (新竹)

    新竹市東區面議
    面議/經驗不拘/碩士

    歡迎對IC design service有興趣的社會新鮮人,剛入職場不久的朋友們加入~~ 1. 電子、電機、資工相關科系畢業 2. 碩士畢業 3. SOC/ASIC concept is a must. 工作內容: 主要負責TSMC先進製程從RTL to GDS Design Chip Implementation的前端設計包括靜態時序分析&優化 Frond-End‘s general responsibilities could include the following: 1. Timing constraint check 2. Static timing analysis using Synopsys PrimeTime 3. Low power design verification using CPF/UPF 4. Power analysis using PrimeTime PX 4. IP QA (quality assurance) and verification 5. Standard cell, IP, memory library and techfile maintenance 6. IO pin sequence assignment 7. Co-work with APR engineer for timing closure 1. MS degree in EE/CS 2. Requires VLSI (Verilog, digital design flow) knowledge 3. Familiar with Synthesis, STA(Static Timing Analysis), Formal tools is plus. 4. Good communication skill is plus

    新竹市東區
    我要應徵
    2018-01-16
  • YS Business Engineer

    桃園市龜山區面議
    面議/5年工作經驗以上/大學

    -Status/Output/Problem Solving: Always maintain up-to-date information on current manufacturing WIP and output status. Ability to point out and predict bottlenecks throughout the MFG process. -Introduction/Support: Support MFG TL or managers while making decisions with persuasive data analysis. Develop management control systems to aid in financial planning and cost analysis and design production planning and control systems to coordinate activities and ensure product quality. -Improvements: Apply lean manufacturing and Kaizen method for MFG operation improvement projects. Also be the data provider/validator to prove the effectiveness of improvement actions. -Control/Reporting: Design reporting format and provide routine report/KPI for MFG manager. -Means/Methods: Ability to utilize SAP and other IT systems proficiently. -Know How/Knowledge transfer: Transfer lean manufacturing/Industrial Engineering concept to MFG team members so that they can apply this to their daily work. -Service/Communication: Communicate across departments in order to come up with most feasible solutions. Influence without power in both vertical and horizontal communications. Be able to plan and prioritize the requests and needs. Contributes to the team by looking for solutions and concepts, by giving input and by executing department tasks.

    桃園市龜山區
    我要應徵
    2018-01-23
  • MIS Specialist / Engineer

    台北市內湖區面議
    面議/3年工作經驗以上/專科

    Job Description : 1. Maintain/Deploy AD/DNS/VPN/FTP/WEB/E-Mail/Firewall/VMWare/SQL(running base) system been implemented by MS-Windows(80%), FreeBSD and/or Linux(20%). 2. Co-operate with group staff across Asia on system developing, QA platform managing, world-wide routing and IT infrastructure. 3. Emergency situation take care. 4. Take care of customer/user support and complains. 5. Periodicity backup/upgrade/update operation. 6. Quality Assurance on in-house software. 7. Local office hardware and inventory support(limited). 8. Other supporting jobs. Qualification: 1. With passion, aggressive and careful on the said jobs. 2. 3+ years hands-on experience on Windows servers. 3. Passion on IT technology, love to deploy new solutions. 4. Be able to communication in English with oversea staff and/or customers. 5. Familiar on routing, firewall, VPN as well as proxy, NAT and TCP/IP. 6. Familiar with MS-AD, MS-SQL(non-coding), IIS, Exchange, Sharepoint, VMWare and Citrix XenServer. 7. Experience on handling various vendor is a plus. 8. Familiar on Linux is a plus. 9. Familiar with scripting is a plus.

    台北市內湖區
    我要應徵
    2018-01-20
  • YS System Installation Engineer

    桃園市龜山區面議
    面議/3年工作經驗以上/大學

    [ Mission ] Calibrates, qualifies and installs ASML‘s products according to the highest quality standards and world class delivery performance [ Job Description ] Install * Is able to work according planning, and reports to TL SIE on a daily basis on the progress of the planning. If planning is not on schedule, proposes to TL SIE new plan of approach * Is able to execute project work * Understands and explains process issues as well as equipment issues to junior colleagues or towards customers * Is capable of resolving a large part of issues without assistance and is highly independent * Is able to track equipment performance(e.g. interpretation of test results) * Is able to prepare technical reports for VIS, ME, D and E, supervisor and is able to give commendation of possible solution * Is able to coordinate test and integration activities for the complete system [ Main Responsibilities ] Final Assembly of Yield-Star systems in a cleanroom environment; Performs system calibration and qualification through functional testing; Install YieldStar systems at customer locations, from unload components, to build, to Site Acceptance Test (SAT). Including equipment with new features; Represents ASML at the customer site in a professional way; Takes responsibility for system progress; Provides first line technical support on integration of systems, in order to minimize impact on production output; Points out recurring problems during assembly, calibration and qualification and contributes to their solution; interfaces with internal customers on technical issues and improvement proposal; Interfaces with own work center, Manufacturing Engineering and Development and Engineering on complex technical reduction issues and New Product Introduction; Transfers knowledge and trains colleagues on existing and newly introduced products; Contributes to continuous improvement activities with technical expertise on both products and (SW) tooling.

    桃園市龜山區
    我要應徵
    2018-01-23
  • DFT Engineer - MBIST (台南)

    台南市中西區面議
    面議/5年工作經驗以上/大學

    ※工作內容 1. Knowledge of MBIST. 2. Mentor Tessent implement experience. 3. Familiar with STA / Simulation ... other verification flow. 4. Proficient in programming skill and UNIX shell. 5. MBIST ATE test debug experience. -EDA development for logic design flow and DFT flow. -Involve in ensure total silicon quality both in design phase and production phase. -System level MBIST planning. -MBIST diagnosis experience. -Share bus MBIST. -Familiar with Verilog/RTL. -Knowledge of boundary scan. -Low power DFT design implementation / verification.

    台南市中西區
    我要應徵
    2018-01-16
  • DFT Engineer - MBIST (新竹)

    新竹市東區面議
    面議/5年工作經驗以上/大學

    ※工作內容 1. Knowledge of MBIST. 2. Mentor Tessent implement experience. 3. Familiar with STA / Simulation ... other verification flow. 4. Proficient in programming skill and UNIX shell. 5. MBIST ATE test debug experience. -EDA development for logic design flow and DFT flow. -Involve in ensure total silicon quality both in design phase and production phase. -System level MBIST planning. -MBIST diagnosis experience. -Share bus MBIST. -Familiar with Verilog/RTL. -Knowledge of boundary scan. -Low power DFT design implementation / verification.

    新竹市東區
    我要應徵
    2018-01-16
  • System Engineer / Specialist

    台北市內湖區面議
    面議/5年工作經驗以上/專科

    1. Maintain/Deploy AD/DNS/VPN/FTP/WEB/E-Mail/Firewall/VMWare/SQL(running base) system been implemented by MS-Windows, FreeBSD and/or Linux. 2. Co-operate with group staff across Asia on system developing, QA platform managing, world-wide routing and IT infrastructure. 3. Emergency situation take care. 4. Take care of customer/user support and complains. 5. Periodicity backup/upgrade/update operation. 6. Quality Assurance on in-house software. 7. Local office hardware and inventory support(limited). 8. Other supporting jobs.

    台北市內湖區
    我要應徵
    2018-01-20
  • Q0510-VQM/SQM Senior Engineer

    新竹市東區面議
    面議/3年工作經驗以上/大學

    1.New vendor survey, quality system & process audit, and performance evaluation. 2.Supply chain EICC management including on site auditing and status reporting. 3. Supplier tooling trial-run, production review and sign off. 4. Component / parts quality issue handling, FMEA and 8D report formulation. 5.SIP formulation and inspector training. 6.Quality management of vendor。 7.Other addition assignment from higher management.

    新竹市東區
    我要應徵
    2018-01-22
  • SoC/IP verification Engineer(Hsinchu)

    新竹市東區面議
    面議/2年工作經驗以上/碩士

    Build up re-usable SoC/IP verification environment for high functional coverage and performance analysis to improve SoC/IP design quality. 1.Familiar with UVM and SystemVerilog or eager to learn UVM 2.Verification IP usage experience 3.SoC/IP design is plus

    新竹市東區
    我要應徵
    2018-01-16
  • Audio/Acoustics Field Applications Engineer

    台北市內湖區面議
    面議/5年工作經驗以上/大學

    •Perform detailed tuning of audio systems for mobile phones, including settings for multi-band compressors and speaker protection settings and sound quality tuning •Cooperate closely with key customer engineers to achieve desired sound quality and performance targets. •Characterize micro-speakers and acoustical components for use with advanced signal processing algorhtims. •Troubleshoot electro-mechanical systems and recommend solutions, including components. •Assist in development of tools used to make your job easier and more efficient. •Evaluate, road test and characterize new products. •Develop evaluation tools and customer demonstration platforms •Act as the customer advocate for sound quality. •Travel to assist customer designs. •Perform competitive analysis.

    台北市內湖區
    我要應徵
    2018-01-21
第 1 / 4 頁,共 123
  • 精選職缺
  • 職場新聞,企業有發布新聞稿、文章、活動等訊息
  • 溫馨職場,企業有提供職場環境及公司文化等簡介
  • 此職務急徵人才
  • 企業實習職缺
  • 研發替代役職缺
  • 企業預估回應您的時間為:「1個工作天」(2~7天以此類推)