1.飯店設備檢修及保養(電機、空調、給排水、消防、鍋爐...等設備)  

2.配合客房報修處理  

3.維持設備之正常運作，遇故障時之狀況排除  

4.具飯店維修工作經驗、相關科系及相關證照尤佳  

5.須配合輪班

NC線切割加工機、放電加工機、工作母機、CO2板金雷射切割機、CNC沖孔機、CNC折床、CO2及UV雷射鑽孔機等設備安裝及售後保養維修服務及操作教育訓練。 

相關經驗者佳、無經驗可。 

具相關經驗者佳、有語言經驗者尤佳、無經驗可。 

~*無工作經驗者,薪資32500元起 

#優先面試持有經濟部能力鑑定（ｉＰＡＳ）證書者

1.Apple相關產品維修 

2.Apple相關產品使用諮詢 

3.提供初階產品檢測及問題辨識之解決方法 

4.顧客接待服務與Apple週邊商品銷售推廣

Location Tainan, Taiwan 

Degree Master 

Experience 0-2 years 

Team Customer Support 

Job category Electrical engineering 

Travel 20％ 

Reference req10625 

Introduction 

Within ASML the sector Customer Support (CS) is responsible for the maintenance, repair and continuous improvement of ASML systems at customer locations. 

One of the departments in this sector is CS HVM. The CS HVM team prepares and manages the CS part of the execution of new system maintenance of new ASML machines at customer sites. These Installations are done in close cooperation with Field Factory System Install Engineering (FF SIE) in shift schedules at customer production environment over a period of 3-4 months. 

Job Mission 

- The Customer Support Organization is responsible for the installation, qualification, repair and maintenance of the ASML systems at the customer site and is responsible for the necessary transfer of know-how to the customer. 

- The Customer Support Engineer (CSE), an ambassador for ASML, must be the first line of support for the repair and maintenance of the ASML Systems. 

- The CSE will interface with the customers, peers, local 2nd line support and staff management to assure timely and accurate support. 

- The CSE must be able to clearly communicate between key stakeholders of technical, organizational and operational stakeholders in relation to driving availability to their specific 

customer. 

Job Description 

- Analyzes, diagnoses, and troubleshoots equipment problems via telephone or at customer site. 

- Performs installation, repair, retrofits, upgrades and preventive maintenance on equipment installed at customer sites. 

- Regularly provides assistance, guidance, leadership, and technical assistance to junior or less experienced field service engineers; may serve as site leader for customer. 

- Maintains and manages an assigned installation equipment base. This includes providing primary support, forecasting, conducting customer support meetings, and ensuring regular communication with the customer. 

- Assists customers in the receipt, installation, and testing of company equipment. 

- Conducts equipment troubleshooting, analysis, and debugging in support of installation or operating activities. 

- Provides service education to customer’s service and operations staff. 

- Ensures that parts are available and as specified for service requirements. 

- Maintains appropriate tools are on hand and as required. 

- Travels as required for the purposes of performing service activities at customer sites or backfilling for other Field Service Engineers. 

- Completes service, expense reports, and other administrative responsibilities in accordance with procedures and with supervisor’s approval. 

- Uses company technical documentation and provides feedback for improvement. 

- Performs other duties as assigned. 

Education 

BS/MS major in Mechanical, Electrical/ Electro-optical, Controlling Engineering, Physics or other related fields 

Experience 

- Fab experience in the Lithography area will be a plus 

- Experience or knowledge of semiconductor manufacturing process is preferred 

Personal skills 

- Good communication skills and command of the English Language 

- Must be a strong team player, supporting & analytical skill and good working habits 

Context of the position 

At customer sites / office

RESPONSIBILITIES 

•Analyzes, diagnoses, and troubleshoots Cymer equipment problems via telephone or at customer site. 

•Performs installation, repair, retrofits, upgrades and preventive maintenance on Cymer equipment installed at customer sites. 

•Regularly provides assistance, guidance, leadership, and technical assistance to junior or less experienced field service engineers; may serve as site leader for customer. 

•Maintains and manages an assigned installation equipment base. This includes providing primary support, forecasting, conducting customer support meetings, and ensuring regular communication with the customer. 

•Assists customers in the receipt, installation, and testing of company equipment. 

•Conducts equipment troubleshooting, analysis, and debugging in support of installation or operating activities. 

•Provides service education to customer’s service and operations staff. 

•Ensures that parts are available and as specified for service requirements. 

•Maintains appropriate tools are on hand and as required. 

•Travels as required for the purposes of performing service activities at customer sites or backfilling for other Cymer Field Service Engineers. 

•Completes service, expense reports, and other administrative responsibilities in accordance with Cymer’s procedures and with supervisor’s approval. 

•Uses company technical documentation and provides feedback for improvement. 

•Performs other duties as assigned. 

QUALIFICATIONS 

•Excellent written & verbal communications skill. 

•Ability to analyze data and report problems,to complete accurate, comprehensive service reports,& to communicate technical issues to other technical staff. 

•Ability to collect, translate, & analyze data and take action based on effectively report problems though written and/or graphical representation of data (detailed Post-Mortem Chronological Abstracts, trending analysis, failure statistics, etc. 

•Advanced customer service skills, with a solid foundation in and an understanding of the importance of relationship building. 

•Expert level of technical knowledge of electronics. 

•Ability to facilitate resolution of technical challenges. 

•Ability to apply advanced knowledge of installation, maintenance/repair, and troubleshooting at both the module and system level. 

•Ability to read and analyze complex opto-mechanical and electronic schematics. 

•Must be able to successfully meet customer site access requirements such as: background checks, safety training, and cleanroom access (gowning and breathing apparatus). 

•International deployment to company or customer site anticipated during first year of employment. 

•Ability to travel via air and auto approximately 20％ of the time, AFTER initial deployment period.

Location Tainan, Taiwan 

Degree Master 

Experience 0-2 years 

Team Customer Support 

Job category Electrical engineering 

Travel 20％ 

Reference req10625 

Introduction 

Within ASML the sector Customer Support (CS) is responsible for the maintenance, repair and continuous improvement of ASML systems at customer locations. 

One of the departments in this sector is CS HVM. The CS HVM team prepares and manages the CS part of the execution of new system maintenance of new ASML machines at customer sites. These Installations are done in close cooperation with Field Factory System Install Engineering (FF SIE) in shift schedules at customer production environment over a period of 3-4 months. 

Job Mission 

- The Customer Support Organization is responsible for the installation, qualification, repair and maintenance of the ASML systems at the customer site and is responsible for the necessary transfer of know-how to the customer. 

- The Customer Support Engineer (CSE), an ambassador for ASML, must be the first line of support for the repair and maintenance of the ASML Systems. 

- The CSE will interface with the customers, peers, local 2nd line support and staff management to assure timely and accurate support. 

- The CSE must be able to clearly communicate between key stakeholders of technical, organizational and operational stakeholders in relation to driving availability to their specific 

customer. 

Job Description 

- Analyzes, diagnoses, and troubleshoots equipment problems via telephone or at customer site. 

- Performs installation, repair, retrofits, upgrades and preventive maintenance on equipment installed at customer sites. 

- Regularly provides assistance, guidance, leadership, and technical assistance to junior or less experienced field service engineers; may serve as site leader for customer. 

- Maintains and manages an assigned installation equipment base. This includes providing primary support, forecasting, conducting customer support meetings, and ensuring regular communication with the customer. 

- Assists customers in the receipt, installation, and testing of company equipment. 

- Conducts equipment troubleshooting, analysis, and debugging in support of installation or operating activities. 

- Provides service education to customer’s service and operations staff. 

- Ensures that parts are available and as specified for service requirements. 

- Maintains appropriate tools are on hand and as required. 

- Travels as required for the purposes of performing service activities at customer sites or backfilling for other Field Service Engineers. 

- Completes service, expense reports, and other administrative responsibilities in accordance with procedures and with supervisor’s approval. 

- Uses company technical documentation and provides feedback for improvement. 

- Performs other duties as assigned. 

Education 

BS/MS major in Mechanical, Electrical/ Electro-optical, Controlling Engineering, Physics or other related fields 

Experience 

- Fab experience in the Lithography area will be a plus 

- Experience or knowledge of semiconductor manufacturing process is preferred 

Personal skills 

- Good communication skills and command of the English Language 

- Must be a strong team player, supporting & analytical skill and good working habits 

Context of the position 

At customer sites / office

1. 模具保養、維修 

2. 生產線及模具之持續改善 

3. 設計壓鑄模具，並參與模具的製作、組立、校正與試模 

4. 積極與生管部門溝通協調，分配模具部門工作，掌握進度，使壓鑄部門生產順利

1.針對故障部分進行修理，更換零組件或線路 

2.利用高階量表、示波器、訊號產生器等儀器，進行故障檢驗 

3.測試受損的機器零件，以便決定是否需要大修 

4.進行產品設備之維修，並做維修登入  

5.意見回饋，公司過去設備常發生之問題或客戶之建議，以利設備儀器研發或購買之參考依據 

6.市場電子商品需求及趨勢資料收集分析，設計新品 

7.依公司討論之結果決定日後舊有設計改善或提升方向，如:提升現有設計、設計降低生產成本、提升產品可靠性等方向 

8.撰寫設計報告，紀錄可行與不可行方法 

9.電路板開發、 產品電路設計、產品測試除錯 

10.樣品製作實驗、樣品承認、製作作業指導書、建BOM 

11.電腦硬體、影聲錄製與電訊通信系統、雷達設備、樂器電子零件及信號系統之裝配及調整

因應擴廠需求，擴大徵才 

1.負責機台保養 

2.協助工程師處理機台異常 

3.配合產線進行各項測機 

4.需搬運化學品 

5.可接受搬運10-20公斤重物者

1.從事各項餐飲器材維護及進行維修工務之工作。  

2.協助各項工程之進行安裝、維修及配置照明設備。。  

3.一年以上水電維修工作經歷，具水電證照者佳。  

4.需有耐心細心、積極負責、協調度高者、配合公司政策推行。  

5.具普通小型車/機車駕照。  

6.其他主管交辦事項。

1.定位車輛及試駕車輛，並使用紅外線定位機。 

2.檢查輪胎底盤周圍相關問題。 

3.更換輪胎拆裝平衡補胎定位等.... 

4.進行例行維修服務(如：更換機油、煞車油....等) 

5.了解顧客問題及車況，確認將進行的保養及維修項目。 

6.輪胎庫存管理。 

7.月休8天，採輪休制度(目前固定排休星期日) 

8.工作獎金

1.定位車輛及試駕車輛，並使用紅外線定位機。 

2.檢查輪胎底盤周圍相關問題。 

3.更換輪胎拆裝平衡補胎定位等.... 

4.進行例行維修服務(如：更換機油、煞車油....等) 

5.了解顧客問題及車況，確認將進行的保養及維修項目。 

6.輪胎庫存管理。 

7.月休8天，採輪休制度(目前固定排休星期日) 

8.工作獎金

1.負責產品配送及安裝。  

2.負責冷凍空調工程之工程規劃、施作、檢修及保養。 

◎需會開手排小貨車

1. 機板異常分析與維修 

2. 負責機板不良品維修作業 

3. 製作維修報表與檔案管理 

4. 清理維護維修用工具與儀器 

5. 異常分析與追蹤改善 

6. 其他專案指派工作

1.繪製施工藍圖，模型及其他規格，計算尺寸，規劃工作程序 

2.將待加工金屬材料加以測量及劃線 

3.從事沖頭、沖模處理 

4.裝配模具零組件，並使用量錶等工具檢驗尺寸 

5.拆卸磨損或有缺陷模具，並修護或更換零件 

6.負責修邊、鑽孔、鋸切及模具修整

1.進行設備之裝設、測試、操作、檢驗與維修等工作 

2.零件加工製程能力與改善、製造成本分析與改善 

3.機台操作及例行性機台清機保養 

4.從事簡易機件製作與加工修配工作 

5.依照工作圖準備材料、工具、刀具、量具、工具機、研磨齒輪

1.根據3D圖面編寫CNC程式並上機進行加工。(包含刀具準備、對刀長、對原點座標)  

2.日常工作報表紀錄 。 

3.現場環境、機械設備日常保養和基礎故障排除 。 

4.協助修改模具或是客戶需求樣品 。 

5.模具攻牙等後處理、成品自主檢查。  

6.協助完成主管交付事項 。 

7.與研發人員討論圖面加工問題。 

8.會使用MasterCam .Work NC者佳  

9.有CNC加工經驗者佳

1. 需有水電及機械維修技能  

2. 有押出機維修經驗著佳

1.根據3D圖面編寫CNC程式並上機進行加工。(包含刀具準備、對刀長、對原點座標)  

2.日常工作報表紀錄 。 

3.現場環境、機械設備日常保養和基礎故障排除 。 

4.協助修改模具或是客戶需求樣品 。 

5.模具攻牙等後處理、成品自主檢查。  

6.協助完成主管交付事項 。 

7.與研發人員討論圖面加工問題。 

8.會使用MasterCam .Work NC者佳  

9.有CNC加工經驗者佳

1.訂定現有ACM及切丁、切條設備保養維修計畫，並執行維護保養。 

2.訂定空壓機及冷凍、真空包裝、空籃清洗設備保養維俢計畫，並執行維護保養。 

3.訂定現有廠區設施保養維修計畫，並執行維護保養。 

4.參與新廠設備引進、基礎設施建設，導入新廠設備操作及技術移轉、維護保養。