目前位置:1111人力銀行找工作日商丸紅國際股份有限公司電力專案分公司Mechanical Engineer – Rotating Equipment & BOP Piping檢舉/反應不實
Mechanical Engineer – Rotating Equipment & BOP Piping

工作內容更新日期:2019/9/19
更新日期

廠商在此日期曾更新過職缺內容

  • ME coordinates individual mechanical engineering activities under the guidance and supervision of the Mechanical Engineering Lead (MEL) or Mechanical Engineering Manager (MEM) 

     

    Responsibilities 

    ME is responsible for: 

    • Project engineering management in own area of expertise with the objective to ensure that all project engineering results are in line with and / or in support of the overall project objectives and targets, including quality, time schedule and budget 

    • Leading / Managing concerned suppliers and subcontractors 

    • Communicating and coordinating his/her activities directly to / with other concerned disciplines (internal and external) 

    • Communicating and coordinating any techno-commercial matters to / with supervising Engineering Lead and TPM, as soon as such matters arise or become known 

    • Taking a pro-active role in management of techno-commercial claims 

    • Making himself/herself particularly knowledgeable of 

    - project-specific RFQ process 

    - project-specific contractual stipulations and requirements 

    - project-specific EHS requirements and standards 

    - project-specific QA/QC requirements and standards 

    - project-specific baseline project time schedule 

    - Marubeni-internal approval processes and procedures 

    • Establishing a positive relationship with clients / partners / suppliers and subcontractors 

     

    Requirements 

    • Have an engineering degree of a publicly acknowledged engineering university in 

    Mechanical engineering (B. Eng. ME) 

     

    • Minimum 10 years of experiences with EPC contract or engineering company (doing EPC) for thermal combined cycle power plant, coal fired plant 

     

    • Capable for engineering design in sizing, calculation flow, head, friction loss for rotating equipment likes pumps, air compressor sizing. capable for technical write up for data sheet and prepare BOQ for RFQ enquiry for BOP rotating equipment. 

     

    • Able to generate BOP P&IDs, PFDs. Have know-how for pipe routing arrangement, Capable for pipe sizing and selection of valves for various BOP systems i.e. CW system, CTMU system, raw water, service water, cycle makeup, service/instrument air system. 

    Shall capable for technical write up for piping system technical data sheet and prepare RFQ for enquiry. 

     

    • Able to generate Piping and Valves BOQ for tendering/ estimation. Have deep knowhow for BOP pipe design, pipe thickness calculation including buried pipe (CW) and detailed piping support design. Capable to prepare BOP Piping and Valve RFQ for enquiry and handle BOP Piping deliverables during execution. 

     

    • Have knowhow of Tank/ Air Receiver Design as per ASME, AWWA and API. Capable to prepare Tank RFQ for enquiry and to handle Tank deliverables during execution. 

     

    • Have deep know-how of cooling tower, heat exchanger, thermal calculation and capable to do the technical write up for cooling tower, heat exchanger technical data and prepare RFQ for enquiry. Have knowledge for crane and hoists, able to prepare technical data sheet for RFQ enquiry. 

     

    • Should have capable of BOP process and good know-how input information for plant plot plan generation 

     

    • Must have tendering and execution capability for BOP mechanical systems, address technical deviations/clarification, system technical write up for bid proposal. 

     

    • Must coordinate with client, consortium partner, and various sub-suppliers on the RFQ enquiry, system design and compliance to the owner’s specifications, codes, etc. shall be reviews and comments supplier proposals and perform technical-commercial evaluations and provide recommendation. 

     

    • Familiar with the international codes applicable for power plant i.e. ASME, ASTM, ANSI, AWWA, API, HI std., ISO, NFPA, ASHRAE, CTI, BS, DIN etc. 

     

    • Able to evaluates techno-commercial assessment to suppliers’ and subcontractors’ proposals. 

     

    • Negotiates suppliers and subcontractors for technical terms, including scope of work, terminal points.

  • 工作地點:
    台北市中山區 南京東路三段168號16樓之1地圖
  • 工作時間:
    日班
  • 工作待遇:
    面議(
    經常性薪資
    經常性薪資定義
    • 包括本薪與按月給付之固定津貼及獎金;如房租津貼、交通費、膳食費、水電費、按月發放之工作(生產績效、業績)獎金及全勤獎金等。
    4萬含以上)  薪資公秤
  • 工作性質:
    全職
  • 職務類別:
  • 需求人數:
    1~2人
  • 到職日期:
    急徵
  • 工作福利:
      同公司福利
      公司福利

      法定項目
      勞保、健保、週休二日、特別休假、勞退提撥金

要求條件

  • 身份類別:
    一般求職者
  • 學歷限制:
    大學 以上
  • 科系限制:
  • 工作經驗:
    10年以上工作經驗
  • 語言能力:
    英文 聽:中等 說:中等 讀:中等 寫:中等

應徵方式

  • 聯絡人員:
    HR
  • ※合適者將主動通知面試,1111線上邀約,求職安全有保障!
  • 主動應徵,可提升您的面試機會
我要應徵
click

主動應徵

為個人形象加分! 搶先出擊,為自己創造機會!主動積極的求職者更容易受徵才企業重視,獲得優先審核履歷的機會。

1111人力銀行提醒您:
履歷表關閉狀態,仍可投遞履歷表!
準時面試勿失約,務必留意自身求職安全!
01. 「不繳錢、不購買、不辦卡、不隨意簽約、證件不離身 」的五不原則。
02. 保護自己的三要原則「 要陪同、要確定、要存疑 」。
03. 不要到非公司或地區偏遠的地點面試。
04. 不要因為急於找到工作,而將提款卡、帳戶、存摺及密碼等資料交給他人。
05. 如遇任何求職詐騙,請勿進行求職面試並與警方反詐騙專線165聯繫,同時向1111反映問題。 更多求職防詐騙資訊

展開 收合
意見反應
top