• 瑞健股份有限公司|醫療器材製造
      瑞健股份有限公司
      桃園市蘆竹區面議(經常性薪資4萬/月含以上)3年工作經驗以上大學,碩士

      a. Lead interdepartmental Design for Manufacturing review to identify issues in design, assembly and tooling. Coordinate technical efforts to improve design through engineering expertise for design transfer into manufacturing 

       

      b. Establish the assembly process by 

      1. Plan the flow chart of manual assembly, semi-auto assembly, and fully auto assembly process. 

      2. Check the EURS of assembly fixtures and equipment at engineering phase. 

      3. Confirm the functionality of fixtures and equipment to meet the EURS. 

      4. Establish the standard working instruction. 

      5. Develop and improve the assembly process to increase the capacity 

       

      c. Sample preparation, outsourcing & create relevant DMR documents and approved by all related Depts. 

       

      d. Others: 

      1. Support and improve the issues occur from tool validation, equipment validation, and assembly validation. 

      2. Participate in DA and DV related technical discussions. If necessary, support from technical view and troubleshooting should be provided. 

      3. One of the members of NCMR decision. 

      4. Participate the Design Review to make sure all the development processes are going as the quality policy. 

      5. For projects in mass production, support with the technical knowledge and suggestions.

      工程學門
      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-11-30
    • 濾能股份有限公司|其他半導體相關
      濾能股份有限公司
      桃園市楊梅區面議(經常性薪資4萬/月含以上)經驗不拘大學以上

      1. 產品開發與專案管理 

      2. 執行新產品專案之時程規劃、風險預估、設計及發展進度掌控、成本控制 

      及結案程序。 

      3. 協助各部門及廠區推動專案之執行、管理、問題追蹤及解決。 

      4. 溝通處理客戶問題。 

      5. 其他主管交辦事項。

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-11-27
    • 王品餐飲股份有限公司
      台中市北區面議(經常性薪資4萬/月含以上)5年工作經驗以上大學以上

      王品集團誠徵【事業群-展店工程資深專案工程師/主管】 

       

      1.工程管理制度建立與優化。 

      2.規劃、監督、規劃、執行工程詢比議價及發包管理。 

      3.管理發包工程廠商及設備維護廠商。 

      4.展店工程工期、施工品質、驗收管理及協調。 

      5.操作流程優化、簡化及系統自動化。 

      6.餐廳維修保養設備巡查管理。

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-12-01
    • 立信電子科技有限公司(立達信光電集團)
      台北市中山區面議(經常性薪資4萬/月含以上)5年工作經驗以上大學以上

      1. 硬體線路開發經驗 

      2. 產品專案硬體開發 

      3. 新技術研發硬體線路設計、驗證、除錯 

      4. PCB Layout 設計 (二至八層板) 

      5. 高速訊號量測及分析 

      6. 獨立作業及跨部門協調整合 

      7. 按項目開發需求可在中國,台北,美國 三地出差的人員 

      8. BOM建立與維護 

      9. 完成主管交辦事項。 具有手工製作樣品能力 有消費型電子產品經驗為佳

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-12-03
    • 宏碁股份有限公司(acer)|電腦╱週邊設備製造
      宏碁股份有限公司(acer)
      新北市汐止區面議(經常性薪資4萬/月含以上)3年工作經驗以上大學,碩士

      The IT Senior Project Engineer is responsible for leading professional team for all Microsoft Active Directory & Exchange & M365 activities and new solutions investigation. This includes regular System operations checking, tuning, monitoring, designing and resolving complex client related problems. 

       

      1. Responsible for Microsoft Messaging, Active Directory and M365 related service. 

      2. To review Global Domain/Messaging architecture and make the plan to enhance the functionality and security. 

      3. To meet business requirement and provide the flexible and modem service. 

      4. Coordinate with regional teams for global project enhancement and management. 

      5. Provide assistance for other IT systems related on AD/Messaging and authentication. 

      6. Document and improve existing processes for area of specialty. 

      7. Recommend, implement, and maintain best practices and corporate standards. 

      8. Identifies linkages of specialty area to other systems/ applications and communicates potential impact to peers and key stakeholders. 

      and key stakeholders.

      資訊管理學類,資訊工程學類,其他工程學類
      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-12-04
    • (捷普集團Jabil Green Point)綠點高新科技股份有限公司
      江蘇省蘇州市面議(經常性薪資4萬/月含以上)經驗不拘學歷不拘

      1. Familiar with new product development and structural design process of injection molding products in 3C industry, capable of structural analysis; 

      2. Responsible for client ID, structural design, optimization, 3D to 2D, etc.; 

      3. Responsible for the product development, size analysis and process analysis of plastic parts; 

      4. Responsible for mold opening test and DFM review; 

      5. Responsible for the process development of injection molding parts (injection molding/radium carving/painting/assembly/printing /CNC/ assembly, etc.); 

      6. Directly contact with customers and discuss technical parameters of injection parts; 

      7. Knowledge of plastic mold, injection molding and FATP process is preferred. 

       

      1、熟悉3C行業塑膠件新產品開發、機構設計流程,具有結構分析能力; 

      2、負責承接客戶ID,機構設計、優化,3D轉2D等; 

      3、負責塑膠件產品開發、尺寸分析、製程分析; 

      4、負責模具開模試模檢討, DFM檢討; 

      5、負責塑膠件製程開發(注塑成型/鐳雕/噴漆/組裝/印刷/CNC/組裝等); 

      6、直接對接客戶,討論注塑件產品技術參數等; 

      7、懂得塑膠模具、注塑成型、FATP特性者優先

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-11-30
    • 爭鮮股份有限公司|餐廳╱餐館
      爭鮮股份有限公司
      台北市信義區面議(經常性薪資4萬/月含以上)3年工作經驗以上大學以上

      1. Workflow 流程程式撰寫、需求分析及設計 

      2. 具系統整合及串接經驗 

      3. BPM專案管理、需求及技術評估 

      4. 負責BPM系統日常運作維護、異常處理、效能監控及調校 

      5. BPM 系統及專案文件撰寫 

      6. 主管交辦事項執行

      資訊工程學類
      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-12-04
    • PHOENIX TECHNOLOGIES LTD_美商鳳凰科技資訊股份有限公司台灣分公司
      台北市內湖區面議(經常性薪資4萬/月含以上)4年工作經驗以上大學以上

      Responsibilities: 

      Provide technical direction and decision making assistance to QA engineering team 

      Review and respond to engineering Product Requirement documents and Technical Specification documents 

      Develop and maintain test documentation, such as: test requirements, test plans, and test cases 

      Provide reliable and accurate time estimates for tasks 

      Understand and identify risks and report project status to management and project leads 

      Document defects using a bug tracking database, performing verifications on fixes in multiple environments 

      Clearly document and/or communicate fix success, failures, and status updates, as appropriate 

      Other duties and responsibilities as assigned by the manager

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-12-05
    • 百慕達商百思買中國股份有限公司台灣分公司(百思買)
      台北市松山區面議(經常性薪資4萬/月含以上)6年工作經驗以上大學

      Role Summary 

      Senior Product Engineer provides technical and project management for the development of the products within the Exclusive Brands Organization. Senior Product Engineer will manage external/virtual resources at our partners and suppliers to ensure end products meet the necessary functional and quality requirements. Senior Product Engineer must well understand the technologies, development, and certification processes appropriate for commercializing Exclusive Brands products as well as having successfully launched multiple products in the North American market. 

       

      Key Responsibilities 

      1) Product Development Execution 

       Work with BBY internal, supplier, SoC/key technology provider to select platform/solution for Exclusive Brands’ product. 

       Work with internal team and supplier to create development plan, resource allocation, risk analysis/mitigation. 

       Design Review execution and reporting. 

       Drive product development progress, leverage internal & external resource to address technical issues timely to ensure product meets product specification and development schedule. 

       Provide technical reporting to internal team. 

       Ensure all quality elements have been validated before releasing a new product for production. 

       New Product Introduction (NPI) Hand-in-hand with Supplier Quality Engineer to ensure product consistency between engineering sample & Mass production goods. 

       

      2) Product Definition 

       Initial & maintain Engineering Specification by leveraging industry standard and our own requirement. 

       Work close with testing team to ensure test plan criteria refer to Engineering Specification. 

       Initial & maintain product design guideline & checklist. 

       Define technical requirement in PRD (Product Requirement Document) 

       Well understand industry trend and technical trend, have the ability to work with key solution providers and create product roadmap and Engineering recommendation for Exclusive Brand. 

       

      3) Product Sustaining 

       Work closely with customer service team and Quality Assurance teams to proactively identify potential issues early after NPI and work with System Integrator to develop corrective actions and manage their implementation. 

       Engineering Change Request (ECR) management 

       Field issue summary & analysis 

       Customer review analysis & improve 

       Provide cost improvement proposal 

       Product quality & performance optimization 

       

      4) Other Engineering General Requiring 

       Vendor management & development 

       Build connection/relationship with key solution provides 

       Project management 

       Engineering reporting 

       Project engineering data analysis 

       Support supplier development initiatives 

       Others… 

       

      Education 

      Bachelors Degree (4 yr) or Equivalent Industry Experience 

       

      Experience 

      - 6+ years work experience on Consumer Electric product research & development.   

      - Strong ability to define problems, collects relevant data, analyze the problem & and draw valid conclusions or arrive at effective solution 

      - Deeply understanding of diagnostic, product test, failure analysis and debug techniques 

      - Self starter, good communication skills and demonstrated problem solving ability   

      - Ability to work under stress and pressure of meeting deadlines 

      - Good Project management skill 

      - Good reporting skill 

      - Team player 

      - Good at written and reading English, smooth communication in oral English. 

      - Willing to share experience with others, and willing to help others’ to grow and success. 

      - Have flexible schedule and be able to participate in conference calls that span multiple time zones.

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-11-30
    • 爭鮮股份有限公司|餐廳╱餐館
      爭鮮股份有限公司
      台北市信義區面議(經常性薪資4萬/月含以上)3年工作經驗以上大學,碩士

      1. SAP ABAP 開發、需求分析及設計 

      2. 具SAP MM/SD/PP/FI/CO 任兩模組以上開發及導入經驗 

      3. 具系統整合及串接經驗 

      4. ERP需求及技術評估 

      5. 負責SAP系統日常運作維護、異常處理、效能監控及調校 

      6. ERP 系統及專案文件撰寫 

      7. 主管交辦事項執行

      資訊工程學類
      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-12-05
    • 爭鮮股份有限公司|餐廳╱餐館
      爭鮮股份有限公司
      台北市信義區面議(經常性薪資4萬/月含以上)3年工作經驗以上大學,碩士

      1. JDE Developer tools 開發、需求分析及設計 

      2. 具 Oracle FIN/DIS/MFG 任兩模組以上開發及導入經驗 

      3. 具系統整合及串接經驗 

      4. ERP需求及技術評估 

      5. 負責Oracle JDE系統日常運作維護、異常處理、效能監控及調校 

      6. ERP 系統及專案文件撰寫 

      7. 主管交辦事項執行

      資訊工程學類
      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-12-05
    • 宏碁股份有限公司(acer)|電腦╱週邊設備製造
      宏碁股份有限公司(acer)
      新北市汐止區面議(經常性薪資4萬/月含以上)經驗不拘大學,碩士

      1. Develop, design and maintain Oracle EBS 12.1.3 Finance Modules (GL, AP, AR, FA, CE, PO) 

      2. Able to manage and change Oracle EBS 12.1.3 finical configurations based on business requirements. 

      3. Assist with issue resolution and work directly with users to solve issues; initiate and manage Service Requests (SRs) with Oracle Support.

      資訊工程學類,資訊管理學類
      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-11-30
    • 1111高階獵頭顧問中心|人力仲介╱代徵╱職業介紹
      1111高階獵頭顧問中心
      台北市中正區面議(經常性薪資4萬/月含以上)8年工作經驗以上學歷不拘

      職責要求 

      1. [Most critical] be at test labs to troubleshoot, debug, video and document daily progress and sharing with us the EMC/EMI/RF failure. Provide feedback to US Compliance team and join conference calls. 

      2. visit vendors and get status; the vendor could be a CM, supplier, or a test lab. 

      3. be at factory (Taiwan or China) to verify and prepare units by checking compliance SW stability, device 

      4. performance to ensure they are ready to be sent to 3rd party test labs; 

      5. Assis in shipping units if asked; 

      6. be at test labs to support testing; 

      7. Suggest any early concerns from a compliance test labs or local changes. 

      8. Generate weekly report with project status (current status, next steps, risks/mitigations) 

      9. Support US team with submissions to regulatory agency by getting urgent MSDS or docs from supplier or vendor. 

      10. Arrange production audit tests and share results. 

       

      任職資格 

      1. Minimum 8 years’ experience with a heavy emphasis on a) EMI/EMC/RF debug experiences; b) US head office support; c) Strong cellular (5G, LTE), WLAN compliance background 

      2. Have strong wireless experiences with cellular (LTE, 5G), WiFi (802.11 a/b/g/n dual band must; 802.11ax/e preferred), BT (LE/classic) devices with the emphasis on the wireless cellular compliance background; 

      3. Must have prior experiences working with consumer electronics devices that have wireless regulatory,industry cert, FCC, CE, safety, environmental compliance. 

      4. Have experiences supporting US-based compliance team in IT company (highly desireable). 

      5. Have prior submission experiences of wireless products to the regulatory bodies (FCC, TCB, NB). 

      6. Must have demonstrated experiences taking consumer electronics products to 3rd party test labs in Asia (Taiwan, or China). 

      7. Travels between China and Taiwan required 

      8. Good English communication skills. Frequent conference calls (even daily) with US compliance team mandatory.

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-09-24
    • 中華系統整合股份有限公司|電腦系統整合服務相關
      中華系統整合股份有限公司
      台北市大安區面議(經常性薪資4萬/月含以上)4年工作經驗以上專科,大學,碩士

      1. 孰悉企業級資料倉儲系統與架構 (如Teradata、Oracle、MSSQL等DW資料庫系統) 。 

      2. 熟悉大數據技術 (Hadoop、Hive等)。 

      3. 熟悉ETL相關應用工具,如SSIS、Trinity等。 

      4. 熟悉Linux及Windows操作。 

      5. 負責相關技術文件撰寫。

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-12-03
    • 銳澤實業股份有限公司|其他半導體相關
      銳澤實業股份有限公司
      苗栗縣竹南鎮面議(經常性薪資4萬/月含以上)1年工作經驗以上高中職,專科,大學

      1.負責分項工程現場指揮。 

      2.負責分包商施工之監督與評估。 

      3.依據施工圖進行工程檢討與審查。 

      4.控管施工進度與品質。 

      5.監工日報表填寫。 

      6.須有相關工作經驗。 

      7.本職務需依工程派駐各縣市(以台南/台中/新竹/林口為主)

      輕型機車,普通重機車輕型機車,普通重機車
      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-12-03
    • 銳澤實業股份有限公司|其他半導體相關
      銳澤實業股份有限公司
      台南市善化區面議(經常性薪資4萬/月含以上)1年工作經驗以上高中職,專科,大學

      1.負責分項工程現場指揮。 

      2.負責分包商施工之監督與評估。 

      3.依據施工圖進行工程檢討與審查。 

      4.控管施工進度與品質。 

      5.監工日報表填寫。 

      6.須有相關工作經驗。 

      7.本職務需依工程派駐各縣市(以台南/台中/新竹/林口為主)

      輕型機車,普通重機車輕型機車,普通重機車
      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-12-03
    • PHOENIX TECHNOLOGIES LTD_美商鳳凰科技資訊股份有限公司台灣分公司
      台北市內湖區面議(經常性薪資4萬/月含以上)5年工作經驗以上大學,碩士

      - Designing and developing BIOS firmware to support silicon and industry specifications 

      - Work with Intel for new Silicon, features’ development. 

      - Assisting CE and FAE to work out solution for customers‘ requirements 

      - Integrating Intel reference codes on Phoenix code base. 

      - Present to the team for feature implementation or bug fix. 

      - Develop UEFI BIOS features, or test tool. 

      - Skills in code review. 

      - Lead feature develop and implement, provide functional test validation. 

      - Support all areas of the code in maintenance, adaptation, and deployment projects

      工程學門
      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-12-02
    • 1111高階獵頭顧問中心|人力仲介╱代徵╱職業介紹
      1111高階獵頭顧問中心
      台北市內湖區面議(經常性薪資4萬含以上)4年工作經驗以上專科以上

      職責要求  

      代理國外客戶在台灣、大陸、甚至亞洲開發機械零組件,需具備英文識圖能力、工程能力,熟悉相關製程,ISO/TS 16949(IATF)品保系統  

       

      任職資格  

      1.機械工程相關科系畢業  

      2.曾有工程、金屬機械零組件之製程4-7年及供應商開發的經驗  

      3.英文精通  

      4.團隊合作、溝通協調、目標管理、問題分析與解決問題的能力  

      5.強烈企團心與責任感,勇於接受討戰,不畏挫敗  

      機械工程學類
      展開收合此次搜尋不想看到這間公司
    • 更新時間:2018-06-04
    • Abatek(Asia) Public Company Limited
      東南亞泰國面議(經常性薪資4萬/月含以上)經驗不拘學歷不拘

      〝1. Graduate of Mechanical/Science/Mechatronic Engineering with atleast 5 years extensive work experience in an automotive manufacturing company as New product Quality Engineer or higher 

      2. Support and verify all p-FMEA/d-FMEA/control plan/ PPAP/MSA requirements for the new projects and manage TFC/TFS activities including all key activities as per APQP and project kick off sheet .  

      3. Independently responsible of quality management processes like APQP, Process Failure Mode Effects Analysis, MSA, PPAP, SPC tools, Root Cause Analysis, etc. 

      4. Practical knowledge of IATF 16949 system and other ISO standard which applies to an automotive industry.  

      5. Experience in handling rubber/ silicone rubber products. Able to read mechanical drawings and ability to use measuring equipment like CMM. 

      6. Ability to speak English language is a must. Excellent in communication and coordination skills are also required.〝

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-12-05
    • 華新科技股份有限公司|被動電子元件製造
      華新科技股份有限公司
      高雄市前鎮區月薪 38,000元以上3年工作經驗以上大學,碩士

      1.標準工時/生產成本/生產力,等工廠製造數據分析管理 

      2.產線 MES 系統管理 

      3.生產力提升改善專案

      工業工程學類,工業管理學類,企業管理學類輕型機車,普通小型車
      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-11-25
  • 精選職缺
  • 此職務急徵人才
  • 企業實習職缺
  • 研發替代役職缺
  • 幸福企業
  • 企業預估回應您的時間為「1個工作天」(2~7天以此類推)