此職務需求用於桃園機場第三航站土建工程 (Samsung C&T Corporation-榮工工程股份有限公司 JV) 1. Perform structural analysis & design calculations of steel and concrete structure. 鋼構及混凝土之結構分析與設計計算。 2. Preparing design report & sketches for approval of consultant and client. 提供設計報告及草稿審核。 3. Preparing engineering sketches and reviewing shop detail drawing to meet all relevant codes, standards and specifications. 確保結構圖面皆滿足相關規範及標準。 4. Review and check subcontractor structural design calculation, design report and shop & fabrication drawings. 審查承包商之結構設計、報告、圖面等。 5. Review and design temporary structures. 設計與審查臨時結構。

此職務需求用於桃園機場第三航站土建工程 (Samsung C&T Corporation-榮工工程股份有限公司 JV) 1. Arrange/prepare the inspection forms to ensure that structural drawings are followed and being implemented on site correctly. 監督現場作業，安排並準備自主檢查，按圖施工。 2. Interpret structural shop drawings and ensure and input rebar and concrete quantity into the inspection forms. 解釋圖面，並確認鋼筋、混凝土之數量正確。 3. Liaise and coordinates with consultants and sub-contractors in solving technical issues and problems that may arise on site. 內外部單位之溝通協調。建築學類,土木工程及水利學類輕型機車,普通小型車,普通重機車

此職務需求用於桃園機場第三航站土建工程 (Samsung C&T Corporation-榮工工程股份有限公司 JV) 1. Assist or sometimes take replace the Façade manager with overseeing the project plan, design and construction work coordinating sectors of the project. 2. Façade drawings review and coordinate with subcontractor, managing the preparation of material submission work. 3. Coordinates subcontractor program and clarify it, Coordinate with the other interface work. 4. VMU & PMU drawing and structural calculation review and attending. 5. Collaborates with the Construction Manager with regards to construct-ability reviews, construction execution planning and manpower requirements.

此職務需求用於桃園機場第三航站土建工程 (Samsung C&T Corporation-榮工工程股份有限公司 JV) 1. Architectural Design Coordinator will work under the supervision of the Design Manager and Sr. Architects and will be responsible for design review, coordination between trades, and managing shop drawings. 建築設計整合人員將與設計經理與建築師合作，負責設計審查、內外部協調及管理施工圖面。 2. Demonstrate a high degree of coordination skill among all disciplines: architectural, structural, MEP, civil, landscape, and façade. 展現高程度的整格技術: 如建築、結構、MEP、土木、景觀等。 3. Produce, check, and manage shop drawings, checking drawings against related specifications, while ensuring all submitting are consistent and well executed. 製作、檢查並管理圖面，根據規範審查圖面，並確保圖面之正確性。 4. Technical Meetings: Actively participate in Technical Meetings and be able to provide design and engineering solutions. Keep a log and record of all meetings, write up a clear and comprehensible RFIs. 參與會議並提供設計與工程解決方案，並整合為完整的RFIs。 5. Understand and demonstrate the need for open and direct communication, both verbally and in writing. Always be ready to work well with Sr. Architects while also being able to help drafters produce shop drawings should they need assistance. 能有效的與內外部溝通協調，於必要時協助製圖人員之需求。建築學類,其他建築及都巿規劃學類,航空學類

此職務需求用於桃園機場第三航站土建工程 (Samsung C&T Corporation-榮工工程股份有限公司 JV) 1. Design, coordinate, plan and manage the civil and structural projects assigned. 制定及整合管理土木及結構工程之專案。 2. Liaise with architects, clients, consultants and other parties involved for the structural and civil engineering works. 協調內外部人員以利工程之進行。 3. Reviewing and verifying for civil and structural engineering work to ensure compliance with the requirements. 土木及結構工程作業之審查，以確保符合要求。 5. Daily operational management of the site, including supervising and monitoring site labor force and the work of any subcontractor. 每日現場作業及人員管理。 6. Ensure construct ability issues are documented. 確保所有施工問題皆被記錄。 7. Assists in the construction phases of the Project providing input as requested in the areas of estimates and schedule/value engineering/construct ability and logistics. 協助編製預算、工程進度、現場施工之排程，監督現場品質及安全無虞。土木工程及水利學類

R&D Pilot Line Fab • Updating the Fab engineers on customer issues and technology needs. • Supporting root cause defect and unique fail mode analysis. Process Integration • Delivering advanced technology to meet future product nodes. • Developing recipes to meet structural & electrical requirements. • Managing wafers though Dry Etch levels in support of special requirements. Other Process Areas • Working in cross-functional teams to jointly develop device structures. • Supporting cross-functional failure analysis and yield improvement. Dry Etch peers • Maintaining or developing expertise in multiple process, hardware, or technology areas. • Serving as a resource for peers in recipe & process development. Qualifications: • Understanding in: Transport phenomena, Electromagnetics, Atomic/Molecular physics, and Surface phenomena • Solid trouble shooting, experimental design and data analysis skills • Strong computer skills, including MS Office • Basic understanding of plasma sources used in plasma etching • Understanding in the principles of dry etch processing • Rudimentary understanding of process control and Statistical Process Control (SPC) Education/Experience: MS/PhD in Electrical Engineering, Mechanical Engineering, Materials Science, Chemical Engineering, Chemistry, Physics 『具工作經驗者，薪資另議』

Introduction to the job We are mainly responsible for mechanical, electrical, software and mechatronics issue and provide the decent solution to external and internal customer. We are seeking a physicist/optical engineer to support and develop optical/photonic sensor systems used within ASML’s YieldStar product. As a Wilton YS Sensor Optical DE in Asia, our responsibility is to offer timely support to any sensor escalation for Internal and External customers to prevent system long down and sensor swap. On top of escalation, support NPI sensor design & integration in WLT, VDH & LF to offer thoroughly issue investigation and design solution for AIR is also in scope. Role and responsibilities The Wilton YS Sensor DE in TW is responsible for the following: Support YS escalation and sensor integration teasks in Asia and work with WLT sensor DE team closely. Resolve YS Sensor structural issues with clear problem definition, containment, & timely structural solutions implementation. Conduct RCA for defect sensors/parts and present detailed findings within 1~2 weeks of receiving the part. Deliver the functional specification (EPS/design spec), design proposal (EDS), test specification (TPS) and qualification document (TAR) of AIR issue. Communicate upward and downward on regular basis for driving issue resolution. Understand proper escalation paths to appropriate stakeholders and acts accordingly. Present and highlight relevant information to key stakeholders to get technical decision buy-in. Flexibility for international travel and facilitator night calls is required. Deliver Sensor SW script with Matlab. Able to do optic simulation with optical SW( Code V/Zemax/Fred) 10％~15％ travel flexibility is required. Education and experience Master’s or PHD’s degree in Optic Engineering or Physics relevant background. Minimum 3+ years work/design experience is preferred Skills Strong technical leadership and influencing skills Strong communication skills in English Matlab coding capability is preferred. Optic simulation software capability is preferred. Team player and goal oriented. Capable of presenting/managing project/issue with ‘Global/Helicopter’ overview. Strong ownership and high flexibility for onsite support. Diversity and inclusion ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company. Other information EOE AA M/F/Veteran/Disability Need to know more about applying for a job at ASML? Read our frequently asked questions.

Introduction to the job 1. As functional owner responsible for the performance requirements of (critical) assets in a particular field. This responsibility entails the performance of assets (f.e. reliability and uptime), managing the risks related to assets, effective set-up of assets (or systems) and an effective cost strategy, resulting in an optimal balance between costs, risk and performance, hence ensuring safety and business continuity. 2. Ensure appropriate supply capacities for assets or asset groups/systems to meet the demands of the business (in close cooperation with Program Managers and Business Partners). To do so, collect, interpret and analyze external and internal information and assess the relevance of those for ASML. 3. Ensure appropriate hook-up of ASML lithography systems and ancillary equipment as well as safe and structural integrity of interfaces within the factories. 4. Measure and analyze how process utilities and building services are used in cleanroom cabins and optimize hook-up strategies finding the optimal balance in strategic planning, requirements from the business and cost, risk and performance. 5. Manage the cleanroom configuration masterplan and keep track of the different cabin configurations. Based on this give advice about feasible planning and required adjustments in (technical) installations in order to meet the long term plan. 6. Translate customer requirements into requirements to be used by project management and validate/review concepts of projects requiring modifications of cleanrooms. 7. Interact with production or D&E liaison, CRE Business partners and project managers from an advisory role to drive efficient and effective hook-up. 8. Continuously optimize the usage of the applicable assets and systems enhancing the life cycle, the performance, sustainability, safety, uptime and costs. Drive innovation and develop solutions, settings and asset configuration together with other experts in the team and/or with experts from supplier companies. 9. Collaborate with business lines regarding the use, re-use and design concepts for utilities, building services and manufacturing environments. Act as third line support in case of incidents and issues in functionality or performance of facility/utility systems. 10. Responsible to manage compliance from insurance perspective and managing the accompanying evidence/documentation. 11. Issue advice and/or conduct (feasibility) studies at request or at own initiative to management to optimize performance and capabilities of assets, supported with analysis, calculations or expert advice. 12. Identify and propose projects to upgrade or improve certain aspects of installations or assets in order to meet requirements from the business, changing performance (f.e. sustainability), regulations or changing policies and deliver input for budget. 13. Validate/review (concept) designs, PIDs, FMEAs, HAZOPs, Program of Requirements, test plans, test results for projects and participate in projects by defining user and technical requirements and acceptance criteria. 14. Validate and/or conduct reviews in commissioning of projects and validate and concur with stage gate approvals. 15. Manage and delegate work to engineering consultancy companies and provide them with the correct requirements, statement of work and briefing to execute work. Participate in the pre-qualifying processes to select third party architect and engineering firms. 16. Validate and audit performance of suppliers. Role and responsibilities - Act as the expert in the applicable field of facilities/utilities, yet maintaining a helicopter/generic view to monitor and judge impact on other assets or the entire system of assets. - Manage and work in close relation with other Competence Engineers and co-create/develop solutions from integrated (system) view. • Embed functional ownership by taking leadership and strong stand-point how and when EDG compliance is required and mandatory and act upon follow-up. • Find a good balance between prescribing guidelines versus workable requirements that meet the needs of the business , and work closely with business partners (e.g. delivery time in projects). • Manage a complex field of stakeholders and in particular manage various interests, and be able to explain and deliberate the necessity of the guidelines set by you. Education and experience - Bachelor/Master in process engineering, mechanical engineering or equivalent • Minimum of 10 years of relevant working experience in the semiconductor industry. Skills • Core Competencies: o In-depth analytical skills o Analytical skills in broad technical scope o Ensures accountability o Manage complexity o Thinks and plans ahead o Ownership & entrepreneurship o Drive results and decision-making processes o Strategic thinking & innovation o Communicative and advisory skills o Judgement and informed decision making Diversity and inclusion ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company. EOE AA M/F/Veteran/Disability Need to know more about applying for a job at ASML? Read our frequently asked questions.

Introduction to the job You will be the Wilton DE representative in TW for supporting the NXE EUV Top Module Escalation project. This role is to act as frontline DE in field, covering the local time zone escalation in time and feedback Wilton DE the issue progress and improvement. Home base will be in ASML Hsinchu office, Taiwan. The mission of WLT NXE EUV TME DE is to enable our field service engineers’ solving power on NXE EUV Top Module to be capable in supporting our customers. As an NXE EUV Top Module expert, you will function as the technical interface between Global Support Center and WLT DE teams to solve issue in time and feedback structural improvement. As a Mechatronics Design Engineer, you need to fully understand the EUV Top Module design and functionality, develop DE level diagnostics skill, and further proposed effective containment and solution. Role and responsibilities Able to clarify the issue for accurate problem description, root cause deep-dive and drive for solution from technical perspective and have helicopter view of LNA EUV top module issues. Knowledge/experience of robotics and stage controls is desirable. Review/study EUV top module design change document to have up to date design info and provide comments to Wilton DE. Able to provide quick containment with data driven analysis for NXE EUV top module issues in field. Manage the lifecycle(E2E) of an action plan that needs to be executed at the customer site. Communicate the issue status updates on a daily basis with WLT DE TME team Manage customer’s expectation and able to bring the customer needs to the D&E project to close gap. Interact with EUV DE colleagues in Wilton for driving the containment and solution. Education and experience Master‘s degree in Mechatronic Engineering preferred (motion/servo control background). At least 3-5 years Industry experience within motion/stage/robot control domain. Candidate should have direct experience in the design and test of mechatronic systems/equipment. Familiar with MATLAB/SIMULINK toolbox. Ability to apply “classical control theory” and “digital control theory” including frequency domain, stability (Nyquist/Bode plots), Velocity-Acceleration-Jerk (VAJ), feedback/feedforward, dynamics, gain and phase, transfer functions, continuous/discrete feedback control, real time controls, etc. Skills Ability to complete assignments with attention to detail and high degree of accuracy. Result driven-demonstrate ownership, identifies bottlenecks and drives improvements. Work independently or as part of a team and follow through on assignments with minimal supervision. Demonstrate open, clear, concise and professional communication. Strong data analytical skills. Strong technical writing and communication skills in English, including presenting results based on strong statistical evidence to audiences of a wide range of technical abilities. Diversity and inclusion ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company. Other information Located in ASML Hsinchu office but report to GL of WLT DE Satellite Team in LK office. Need to take On Job Training(OJT) in WLT/US for 3-6 months in the 1st year. Flexibility for traveling to different ASML offices or customer site for urgent escalation support. Daily work alignment calls with WLT DE colleagues except Friday. Need to know more about applying for a job at ASML? Read our frequently asked questions.

Introduction to the job As a GSC team member, we create values to customers by providing technical support to solve issues of E-beam inspection machines, as well as identifying and reporting structural issues to initiate continuous improvements. We also contribute to push the boundary of technology by supporting introduction of new products and transition to production. GSC is also good team players through collaboration with various stakeholders This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology. Role and responsibilities As a GSC team member, we create values to customers by providing technical support to solve issues of E-beam inspection machines, as well as identifying and reporting structural issues to initiate continuous improvements. We also contribute to push the boundary of technology by supporting introduction of new products and transition to production. GSC is also good team players through collaboration with various stakeholders Education and experience Master Degree Above Skills (Remote / onsite) act as 3rd line technical support team, Global Support Center (GSC), to handle worldwide escalation issues of E-beam machines (Remote / onsite) coordinate escalation process with related stakeholders to drive for timely and structural diagnostics Contribute to quality technical documents including service procedures, escalation issue reports, and BKM Collaborate with related stakeholders to take improvement measures as a post action of escalation diagnostics Collaborate with related stakeholders to support NPI projects Lead / support CS technical projects Transfer knowledge within GSC / to CS through presentation session to help team skill up Diversity and inclusion ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company. Other information EOE AA M/F/Veteran/Disability Need to know more about applying for a job at ASML? Read our frequently asked questions.

R&D Pilot Line Fab • Updating the Fab engineers on customer issues and technology needs. • Supporting root cause defect and unique fail mode analysis. Process Integration • Delivering advanced technology to meet future product nodes. • Developing recipes to meet structural & electrical requirements. • Managing wafers though Wet&Dry etch levels in support of special requirements. Other Process Areas • Working in cross-functional teams to jointly develop device structures. • Supporting cross-functional failure analysis and yield improvement. Wet or Dry Etch peers • Maintaining or developing expertise in multiple process, hardware, or technology areas. • Serving as a resource for peers in recipe & process development. Qualifications: • Understanding in: Transport phenomena, Electromagnetics, Atomic/Molecular physics, and Surface phenomena • Solid trouble shooting, experimental design and data analysis skills • Strong computer skills, including MS Office • Basic understanding of wet process /plasma etching • Understanding in the principles of wet etch or dry etch processing • Rudimentary understanding of process control and Statistical Process Control (SPC) Education/Experience: MS/PhD in Electrical Engineering, Mechanical Engineering, Materials Science, Chemical Engineering, Chemistry, Physics 『具工作經驗者，薪資另議』工程學門

R&D Pilot Line Fab • Updating the Fab engineers on customer issues and technology needs. • Supporting root cause defect and unique fail mode analysis. Process Integration • Delivering advanced technology to meet future product nodes. • Developing recipes to meet structural & electrical requirements. • Managing wafers though Dry Etch levels in support of special requirements. Other Process Areas • Working in cross-functional teams to jointly develop device structures. • Supporting cross-functional failure analysis and yield improvement. Dry Etch peers • Maintaining or developing expertise in multiple process, hardware, or technology areas. • Serving as a resource for peers in recipe & process development. Qualifications: • Understanding in: Transport phenomena, Electromagnetics, Atomic/Molecular physics, and Surface phenomena • Solid trouble shooting, experimental design and data analysis skills • Strong computer skills, including MS Office • Basic understanding of plasma sources used in plasma etching • Understanding in the principles of dry etch processing • Rudimentary understanding of process control and Statistical Process Control (SPC) Education/Experience: MS/PhD in Electrical Engineering, Mechanical Engineering, Materials Science, Chemical Engineering, Chemistry, Physics工程學門

Introduction ASML supports the semiconductor industry’s ongoing quest for producing faster, smarter and more energy efficient chips. We are a young, dynamic, international and highly skilled workforce. ASML creates the systems that the lithography industry needs to achieve its goals. This can only be accomplished with a strong support of our suppliers. Are you an engineer who is challenged by managing the quality performance of suppliers in a high tech-low volume environment, specialized in electrical, mechanical, chemical or optical engineering? Job Mission As Quality Supplier Manager (QSM) you are responsible for the quality and operational performance of a selected number of suppliers. You work with suppliers on performance monitoring, solve technical issues and drive technical process improvements, for example quality and yield improvement, process control, cycle time reduction, risk analysis and reduction. You work closely together with the supplier team,, the logistics account manager, the procurement account managers , and New Product Supply Chain Engineers from ASML. Depending on the complexity and exposure of the account, you are member of the Supplier Account Team. Main areas of interest are material availability, process optimization and supplier development. Job Description Responsible for the entire Quality and Technical process performance for suppliers and their n-tier suppliers. Monitor, review and drive supplier quality performance from incidents to structural improvement Contribute to supplier development (e.g. implementing SPC, lean, FMEA, operational excellence at suppliers or n-tier suppliers). Optimize manufacturing processes at suppliers by improving quality, testing and qualification infrastructure Drive yield improvements and process improvements at suppliers. Actively participate in improvement project at suppliers (cycle time reduction, cost of goods reduction). Carry-out analysis of quality issues and drive technical solutions needed during material availability escalations. Support implementation of hardware changes at suppliers. Build-up and develop technical competences within ASML (SPC, lean manufacturing, FMEA, operational excellence) to drive and support operational excellence at suppliers. Limited travel, depending on assigned supplier base. Education Bachelor or Masters degree in mechanical or industrial engineering. Experience 5 – 15 years relevant work experience in a similar role Experience with supply chain processes in production environment, eg. Six sigma, lean, etc. Experience in improvement projects in supply chain, preferably in High-tech industry Experience in relationships with suppliers Experience in optics manufacturing Personal skills Excellent communication skills Convincing/negotiation skills Relationship builder (internal and external) Pro-active attitude Strong analytical skills Ability to switch between complex matters and high-level conclusions. Understanding of manufacturing technology Result oriented, hands-on mentality Fluent in English Context of the position The holder of this position reports to the Group leader of the Asia Supply Chain Quality & Logistics. Interfaces with Suppliers, Project leads Development, Customer Support, Manufacturing, Engineers, Logistic and Procurement. Travelling may be required.

“Quality is more important than quantity. One home run is much better than two doubles.” ––- Steve Jobs, CEO Apple “When you do quality right, it creates trust with customers.” – Peter Wennink, CEO ASML ASML is committed to providing a high level of customer satisfaction and trust by delivering high-quality, sustainable products and services that consistently meet or exceed our customer’s expectations. The ASML quality culture aims to shorten Time to Mature Yield and ensure end-to-end quality of our products and services through: - First time right: Apply risk management on products and execution, to minimize the impact for our customers. - Zero defect: Embed controls to guarantee adherence to our policies, processes and procedures. - Zero repeat: Learn from failures and prevent reoccurrence, driving structural improvement in our products, services and processes. Are you the one to exhibit interest and passion for continuous improvement, breakthrough comfort zone to deal with challenges and problem, like to conquer objectives and collaborate with people? Welcome to join Taiwan Quality Team. Job Description: During internship period, you will take a pivotal role to assist meeting and quality activities arrangement and promotion, administrative work for quality daily operation, data collections and consolidations from quality databases by excel

Introduction Do you excel in managing and motivating others in technically challenging and complex projects? Do you have the ability to predict problems before they happen? ...And drive solutions! If so, a career as ASML Production Engineering team leader in Tainan factory awaits you. Job Mission ASML, a market leader in the semiconductor lithography equipment, is looking to fill the role of Team Leader within the Production Engineering Group of Tainan Factory. The role will require managerial and technical leadership for up to a 10-member group working on product design review, performance analysis, troubleshooting, structural issue resolution and efficiency improvements of eBeam production process. We are looking for someone with a strong technical background to be able to assume the leadership responsibilities while being a hands-on member providing support where needed. This is a very technical group where a complex engineering background and analytic thought are as important as inspiring leadership and people development. Job Description As a PE TL you will prepare the factory for a smooth production process of some of the most complex machines ever built – the eBeam metrology product from ASML. You will be accountable for the quality, technical integrity, and planning for on time execution of deliverables. Meet regularly one on one with your team members and hold regular team meetings to provide mentoring, coaching, and career development guidance. Collect feedback, provide input to salary and promotion decisions, and deliver annual performance evaluations. You will also be challenged to identify and lead continuous improvement projects that improve the way of working, increase collaboration, and streamline our ASML processes. Main Responsibilities Lead the team to ensure the knowledge transfer, proto/pilot build and new process industrialization of the NPI products designed in VHV, SJ and BJ are smoothly transferred to Tainan factory (e.g. common platform NPI transfer)Assist to industrialize the proto and/or pilot production, create way of workings and prepare for ramping up and high volume productionSpecify and secure the training needs to enable the manufacturing group to build the systems.Feedback knowledge to D&E to ensure system design improvement, maintain the issue resolution escalation channelResponsible for people management and career development activities including recruiting, onboarding, training, mentoring, coaching, and performance evaluation.Responsible for resource management working with Project Leaders to anticipate program staffing and skillset needs Education MSc/BSc of Physics/ Electrical Engineering/Mechatronics/Electronics/Mechanical or likewise Experience 5+ years of direct management experience in a technical field.Possess strong leadership and ownership characteristics – demonstrated commitment to achieving results on time.Have strong written and oral communicative skills – ability to communicate effectively to your team and to senior management.Demonstrated “team player” with a quality orientation and interpersonal skills.Capability to interface with multidisciplinary groups (including senior leadership), and be willing to take on responsibility, follow through and keep multiple simultaneous projects on schedule.Be willing to own the integrated systems performance, and support the entire product life-cycle (development through sustaining engineering). Strive to enable your team to deliver the right design solution for the right cost at the right time.Ability to inspire and coach individuals and groups to achieve career development and performance targets.Personal skills Can observe and respond to people and situations and interact with others encountered in the course of work. Can learn and apply new information or skills.Must be able to read and interpret data, information, and documents.Strong customer focus and commitment to customer satisfaction through prioritization, quality, efficiency and professionalism.Ability to complete assignments with attention to detail and high degree of accuracy.Proven ability to perform effectively in a demanding environment with changing workloads and deadlines.Result driven-demonstrate ownership and accountability.Identifies bottlenecks and drives improvements.Work independently or as part of a team and follow through on assignments with minimal supervision.Demonstrate open, clear, concise and professional communication.Ability to establish and maintain cooperative working relationships with manager, co-workers and customer.Work according to a strict set of procedures within the provided timelines.Context of the position Reports to production engineering manager Other information Travel ％ 25％

專長及技能 1.SQL 2.Excel 3.Google Analytics 4.Firebase 職缺描述 As a Data Engineer, you will gather and scrutinize data and other information to assist the company in making effective improvements on our product. You will collect, organize and interpret statistical information to help coworkers to make decisions and guide the company to new achievements by responding to questions about data and examining for trends, patterns and anomalies. What you will do: Maintain and monitor various data reports of the company on a daily basis and create corresponding charts for further analysis and optimized strategies for implementation Develop dashboards to expand access to data and analytics Support data-oriented analyses to be presented to high-level stakeholders in slide decks and memos to guide audience strategy Deliver algorithm analysis and insights, advice on algorithm improvement and app performance enhancement Retrieve various data of the company’s application on Google Cloud Platform and assist and coordinate with cross-functional teams, such as product, marketing, legal and engineering team to analyze daily numbers Optimize current data workflow. 職缺需求 Nice if you have: 2+ years of experience working with data teams to deliver reporting and analysis or a quantitative degree Advanced skills in Google Sheet functions and data organization formatting Proficiency in SQL (a must) and experience working with relational databases Familiarity with GCP storage solutions such as BigQuery, Cloud Storage etc. Familiarity with data visualization products such as Looker Studio Collaborative mindset, strong curiosity, and an excitement for learning new skills Excellent analytical reasoning and problem-solving skills Enthusiasm for working with team members from different backgrounds and contributing to inclusive culture 其他條件 Even better if you have: Experience in Python and/or Golang Experience with A/B testing Familiarity with digital analytics datasets or services like Google Analytics Experience applying statistics to strategic problems The ability to communicate cross-functionally - written, visually and verbally - in order to present key insights to team members, partners and stakeholders Good organization and a systematic or structural approach to your work

伺服器DFT 經理Design For Test Job Summary The DFT Engineer plays an important role in the development of test programs and as an interface for test application and diagnostics for Server product development. Job Description • Working with rest of the team to document DFT specifications • Developing, implementing DFT architecture and infrastructure • Deployment and implementation of DFT/DFD (Design For Debug) techniques for Server product • Deployment of DFT methodologies that reduce test cost and increase production quality • Defining the core test strategy, developing test models, creation of macro test rules and patterns • Verification of manufacturing test rules, creating the test specification, debugging manufacturing tests • Generating structural test vectors, analyzing and improving coverage • Working with designers on DQA, SIT, Diagnostics and manufacturing test engineering issues • Managing schedules and supporting cross-functional engineering effort

• Qualification, Skills, and Relevant experience Qualification - Bachelor‘s degree in Building Construction, Construction Management, or Civil Engineering - Proficient in Microsoft Office and general computer software. Should have knowledge of Autocad and BIM software Skills - Strong leadership and management skills - Comfortable reading and understanding PDF and CAD drawings - 10-12 years of experience in project management within ground-up building construction and construction of high-end commercial interior fit-out - Hands-on knowledge about necessary permits, approvals, and other regulatory prerequisites - Should have good written and verbal command over English and Mandarin Language Relevant Experience/ knowledge - 10-12 years of experience in project management within ground-up building construction and construction of high-end commercial interior fit-out - Should have proven working experience in construction management or a similar role - Hands-on knowledge about necessary permits, approvals, and other regulatory prerequisites - Demonstrate knowledge of construction, engineering, high-end commercial interior fit-out (Hospitality Projects), architecture principles, MEP High side and low-side services, overall coordination - Outstanding knowledge of building products, construction details, and relevant rules, regulations, and quality standards - High degree of familiarity with contract and subcontract documents, terms, and conditions • Responsibilities - Responsible for overall building construction, Interior Fit-put & MEP works - Oversee, manage and direct construction projects from beginning to end - Ensure work is done in compliance with all relevant building and safety codes - Should have the ability to coordinate with the design team at different geographical locations, local coordination between Permit Architect, Structural consultant, MEP consultant, Cost consultant, GC contractors, etc. - Manage construction schedule and activities - Always ensure quality construction standards - Ensure the schedule of all the deliverables - Plan ahead to prevent problems and resolve any emerging ones - Budget planning and cost estimating - Manage and mitigate risks - Good time-management skills - Ability to multi-task - Predict resources needed to complete the project - Monitor and guide compliance with building and safety regulations - Prepare internal and external reports pertaining to job status - Prepare weekly progress reports indicating progress updates regarding Quality, safety, Progress, cost, and timelines建築學類,土木工程及水利學類,機械工程學類