• 香港商硅谷數模科技有限公司(Analogix硅谷數糢)
      台北市內湖區月薪 70,000~150,000元經驗不拘大學

      Job Description: 

      1.Understand the expected functionality of designs; 

      2.Develop testing and regression plans; 

      3.Design and develop verification environment; 

      4.Run RTL and gate-level simulations/regression; 

      5.Code/functional coverage development, analysis and closure; 

      6.Release the documents during the verification flow,such as verification plan, usage of the verification environment, simulation result of test cases, verification coverage report, etc. 

      职位描述: 

      1.了解设计的预期功能; 

      2.制定测试和回归计划; 

      3.验证环境的设计与开发; 

      4.运行RTL和gate-level模拟/回归; 

      5.代码/功能覆盖开发、分析和结束; 

      6.发布验证流程中的文档,如验证计划、验证环境的使用、测试用例的模拟结果、验证覆盖率报告等。 

      Requirements: 

      1.design/verification experience (test plan, test bench, assertions, ‎ debugging designs, code coverage etc.); 

      2.Knowledge in ASIC/FPGA design process and verification tools/env (UVM/OVM…); 

      3.Familiar with design and verification languages (Verilog, System Verilog, SVA etc.); 

      4.Knowledge of high speed interface, such as DDR, DisplayPort, etc. 

      5.Independent and self-managing; 

      6.Cooperative and active in daily work. 

      1.设计/验证经验(测试计划,测试台上,断言,‎调试设计,代码覆盖率等); 

      2.了解ASIC/FPGA设计流程和验证工具/env (UVM/OVM…); 

      3.熟悉设计验证语言(Verilog, System Verilog, SVA等); 

      4.了解高速接口,如DDR,显示端口等。 

      5.独立和自我管理; 

      6.在日常工作中积极配合。

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-10-20
    • 台灣艾司摩爾科技股份有限公司(ASML)
      新北市林口區面議(經常性薪資4萬含以上)經驗不拘大學,碩士

      Location Linkou, Taiwan 

      Degree Master 

      Experience 0-2 years 

      Team Manufacturing 

      Job category Other technical job categories 

      Travel 40% 

      Reference req12328 

       

      Introduction 

      Be in lead as a problem owner to drive technical solutions within pilot & volume production. Minimize downtime on our tools and ensure 100% quality to our customers. For new products perform well prepared introduction in the pilot-factory by reviewing the design, participate in FMEA’s and validate the production process during the pilot phase. 

       

      Furthermore you contribute on defining the next generation of these products in close cooperation with the D&E. 

       

      Job Mission 

      General scope of the role: 

       

      •Participates in and drives projects and process improvements 

      •Focus on preventing issues and achieving the right quality. 

      •Optimize the production process and perform Issue tracking/solving to be able to transfer the product into the volume organization 

      •Masters a single competence well enough to work independently 

      •Project planning and risk assessment 

       

      Functional competencies and working contents 

       

      •Technical competence(Optics, Metrology, Mechatronics) 

      o Optimize solutions for specific problems in an innovative and creative way base on technical knowledge 

      o Analyze and select the best solution for specific problems from all known possible solutions, in an innovative and creative way 

      o Identifies gaps and drives solution, ensures processes are adapted to prevent (work) process errors from recurring 

       

      •Project management and risk assessment 

      o Operate as integrator Joining NPI(New Product Introduction) well prepared introduction in the pilot-factory 

       

      •Progress improvement: 

      o Initiate and drive new procedures changes 

      o Prevent technical disturbances from repeating by implementing learning from previous platform issues and enforcing R4V (Release for Volume) according PGP 

       

      •Team work: 

      o Communicate and able to co-work with across department levels 

      o Proactively seek out ways to reach beyond team and support others in accomplishing goals 

       

      Education 

      Bachelor or Master of Physics/ Electrical Engineering/Mechatronics/Electronics/Mechanical. 

       

      Experience 

      •Preferably 3 years of experience in a production environment with high tech products and complex production processes, preferably in both assembly and test environment; 

      •Experience in the field of Technical Production Engineering and quality methodology such as statistical process control and FMEA is an advantage. 

      •Experience with Optics and/or Metrology and/or Mechatronics knowledge is preferred. 

       

      Personal skills 

      •Takes ownership 

      •Hands on mentality; 

      •Focused on safety and quality 

      •Broad technical and business knowledge; 

      •Effective interpersonal skills; able to convince others; 

      •Team player; 

      •LabVIEW, C++, excel (plus); 

      •Proficient in English

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-10-20
    • 台灣艾司摩爾科技股份有限公司(ASML)
      新北市林口區面議(經常性薪資4萬含以上)經驗不拘大學,碩士

      Location Linkou, Taiwan 

      Degree Associate 

      Experience 0-2 years 

      Team Manufacturing 

      Job category Mechanical engineering 

      Travel 40% 

      Reference req12062 

       

      Job Mission 

      Install 

      * Is able to work according planning, and reports to TL SIE on a daily basis on the progress of the planning. If planning is not on schedule, proposes to TL SIE new plan of approach 

      * Is able to execute project work 

      * Understands and explains process issues as well as equipment issues to junior colleagues or towards customers 

      * Is capable of resolving a large part of issues without assistance and is highly independent 

      * Is able to track equipment performance(e.g. interpretation of test results) 

      * Is able to prepare technical reports for VIS, ME, D and E, supervisor and is able to give commendation of possible solution 

      * Is able to coordinate test and integration activities for the complete system 

       

      Job Description 

      Final Assembly of Yield-Star systems in a cleanroom environment 

      Performs system calibration andqualification through functional testing 

      Install YieldStar systems at customer locations, from unload components, to build, to Site Acceptance Test (SAT). Including equipment with new features 

      Represents ASML at the customer site in a professional way 

      Takes responsibility for system progress 

      Provides first line technical support on integration of systems, in order to minimize impact on production output 

      Points out recurring problems during assembly, calibration and qualification and contributes to their solution; interfaces with internal customers on technical issues and improvement proposal 

      Interfaces with own work center, Manufacturing Engineering and Development and Engineering on complex technical reduction issues and New Product Introduction 

      Transfers knowledge and trains colleagues on existing and newly introduced products 

      Contributes to continuous improvement activities with technical expertise on both products and (SW) tooling 

       

      Education 

      Bachelor degree or above and major/master in mechanics 

       

      Experience 

      Experience with mechanics and electronics 

      Experience with computer systems and test software 

      Experience or proven affinity with functional testing and troubleshoot 

      Capable of logging the progress of the workflow and the interruptions 

      Follow up on actions and give feedback on taken actions. 

       

      Personal skills 

      Ability to work in a multi-disciplinary team within a high tech(proto) environment 

      Flexibility to work in shifts and weekends, work overtime when needed 

      Technical drive: curious, persistent, practical, analytical; drive for continuous improvement; drive to share knowledge and train colleagues 

      Accurate within the job, the job environment and the work flow 

      Familiar with computers, Word and Excel 

      Good English language skills in speech and writing 

      Good social and communication skills; with a customer focus forunderstanding, influencing and supporting them 

      Awareness of various cultures and their differences 

      Effective interpersonal skills: able to convince others, able to take the lead 

      Flexible, can cope with stress;Very active, plenty of initiative.

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-10-20
    • 台灣艾司摩爾科技股份有限公司(ASML)
      新北市林口區面議(經常性薪資4萬含以上)經驗不拘碩士,博士

      Location Linkou, Taiwan 

      Degree Master 

      Experience 3-7 years 

      Team Customer support 

      Job category Mechanical engineering 

      Travel 30% 

      Reference req12508 

       

      Introduction 

      Are you looking for a dynamic, international environment where you, as The Expert, will be the ‘hero’ when you solve difficult technical problems? Would you like to travel 20-30% and meet people from different cultures? 

       

      Job Mission 

      Help our partners in Field Support maximize ASML tool performance, by providing a responsive one-stop shop for diagnostic support, specialized skills, and knowledge. 

       

      Job Description 

      1. Technical problem solving within the F&T (Flow and Temperature) competency. 

       

      •Solve complex technical problems by remote analyzing data and creating pro-active action plans. 

      •Mobilize to customer site when not able to solve problem remotely. 

      •Escalate to the next support level (D&E, IE, MF, SC, etc.) in a timely manner when we are not able to solve the issue within the GSC-WW team and/or within the escalation process timing window. 

      •Facilitate in escalations from the continental GSC’s (Asia/EU) towards the Factory (D&E, IE, manufacturing, etc.) 

      •Manage the (technical) escalation, secure that the right data is available, and provide routine updates to management and stakeholders. 

      •Identify, secure and support rollout of improvements for installed base machines 

       

      2. Knowledge proliferation 

       

      •Identify learning by use of IRP (Incident Repeat Prevention) process and make sure that proper follow-up is secured. 

      •Mentor trainees and deliver feedback on potential improvements 

      •Proliferate knowledge to the field at every opportunity 

      •Integrate background information in action plans 

      •Combine on-site support with knowledge transfers to local organization 

       

      3. NPI preparation 

       

      •During the NPI phase be assigned to the project in order to gain the required skills and knowledge to independently support field escalations. Be in charge of your own training plan and indicate what is required. 

      •Transfer and share gained skills and knowledge within WW GSC in order to establish and maintain equal continental GSC continental support teams. 

      •Onsite introduction phase support by delivering knowledge/escalation handling to local organization 

       

       

      Education 

      Bachelor or Master degree in Technical Science (Physics, Mechatronics, Electronics, Chemistry, Process Technology) or equivalent experience. 

       

      Experience 

      Knowledge of ASML equipment on a specialized technical level is a plus. 

       

      Personal skills 

      •Strong communicator in English (both oral and written). 

      •Strong analytic capability and a pro-active initiating attitude. 

      •Flexible in working hours, travel and work environments. 

      •Flexible for temporary (inter)national assignments (3-6 months) 

      •Independent 

      •Team worker, good social skills, customer-oriented. 

      •Ability to plan and set priorities 

       

       

      Context of the position 

      Position will require traveling up to 30%. Home base for GSC Flow/Temperature is Linkou, TW

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-10-20
    • 台灣艾司摩爾科技股份有限公司(ASML)
      新北市林口區面議(經常性薪資4萬含以上)經驗不拘大學,碩士

      Job Description 

      Assemble and test complex systems in a clean room environment. 

      Support process improvements, Engineering testing, Lean Manufacturing and Quality improvements 

      Train and mentor others 

       

      Quality: produce products in accordance with established specifications. Observe and report about regular and/or on-going problems that occur in the construction of products or their operation. Give support to the solution of these problems. Contribute to the improvement of products and processes. 

       

      Production: manufacture and deliver high level, complex systems according to the established procedures. Solve any technical problems that occur. Set an example to other members of the team. Oversee the total process from assembly through to test and act as a reference source for problem solving in the area of expertise; 

       

      New products: actively contribute to the pilot production process and the transition to volume production. Support for the development and improvement of TPD, processes and records and other relevant topics. Before the implementation of new procedures, investigate what their impact will be on the production process. 

       

      Skills: acquire sufficient knowledge of new and established products and processes, modifications, sub-modules and complete systems. Have an in-depth knowledge of the correlation between the module and the whole system and the relationship with other (sub) systems. Pass on relevant expertise; 

       

      Teamwork: support good teamwork by the search for solutions and ideas arising from input and the implementation of departmental tasks. 

      Planning: coordinate the activities given in the production plan and monitor the practical situation. Closely control the use of tools, materials and equipment; 

       

      Education 

      Bachelor degree of Machanical engineering/Electrical engineering/Electronics engineering/Photonics relative 

       

      Experience 

      3-5 years experience in a technical assembly environment preferred 

      Lean Manufacturing Training (ie. Intro to Lean, 5S, Kaizen, VSM, etc) 

       

      Personal skills 

      Strong analytical skills – capable of translating requirements into executable schedule. 

      Must be able to work in a Cleanroom environment. 

      Cross train and support cross functional groups. 

      Self-motivated with the ability to prioritize, meet deadlines and manage changing priorities. 

      Strives for and facilitates continuous improvements 

       

      Context of the position 

      Linkou factory assembly engineers‘ job content is to assemble , adjust and test subsystems by materials for building up a lithogrothy system finally. 

      The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 

       

      While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. 

      The employee is occasionally required to move around the campus. 

      The employee may occasionally lift and/or move materials under EHS regulations. 

      May require travel dependent on company needs. 

      Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. 

      Can work under deadlines. 

      The environment generally is moderate in temperature and noise level. 

      Must be able to read and interpret data, information, and documents. 

      Can observe and respond to people and situations and interact with others encountered in the course of work. 

      Can learn and apply new information or skills.

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-10-20
    • 台灣艾司摩爾科技股份有限公司(ASML)
      新北市林口區面議(經常性薪資4萬含以上)經驗不拘大學以上

      Location Linkou, Taiwan 

      Degree Master 

      Experience 0-2 years 

      Team Customer Support 

      Job category Mechanical engineering 

      Travel 

      Reference req11567 

       

      Introduction 

      Within ASML the sector Customer Support (CS) is responsible for the maintenance, 

      repair and continuous improvement of ASML systems at customer locations. 

      One of the departments in this sector is CS HVM. The CS HVM team prepares and 

      manages the CS part of the execution of new system maintenance of new ASML 

      machines at customer sites. These Installations are done in close cooperation with Field 

      Factory System Install Engineering (FF SIE) in shift schedules at customer production 

      environment over a period of 3-4 months. 

       

      Job Mission 

      The Customer Support Organization is responsible for the installation, qualification, repair and maintenance of the ASML systems at the customer site and is responsible for the necessary transfer of know-how to the customer. 

      The Customer Support Engineer (CSE), an ambassador for ASML, must be the first line of support for the repair and maintenance of the ASML Systems. 

      The CSE will interface with the customers, peers, local 2nd line support and staff management to assure timely and accurate support. 

      The CSE must be able to clearly communicate between key stakeholders of technical, 

      organizational and operational stakeholders in relation to driving availability to their specific customer. 

       

      Job Description 

      Analyzes, diagnoses, and troubleshoots equipment problems via telephone or at customer site. 

      Performs installation, repair, retrofits, upgrades and preventive maintenance on equipment installed at customer sites. 

      Regularly provides assistance, guidance, leadership, and technical assistance to junior or less experienced field service engineers; may serve as site leader for customer. 

      Maintains and manages an assigned installation equipment base. This includes providing primary support, forecasting, conducting customer support meetings, and ensuring regular communication with the customer. 

      Assists customers in the receipt, installation, and testing of company equipment. 

      Conducts equipment troubleshooting, analysis, and debugging in support of installation or operating activities. 

      Provides service education to customer’s service and operations staff. 

      Ensures that parts are available and as specified for service requirements. 

      Maintains appropriate tools are on hand and as required. 

      Travels as required for the purposes of performing service activities at customer sites or backfilling for other Field Service Engineers. 

      Completes service, expense reports, and other administrative responsibilities in accordance with procedures and with supervisor’s approval. 

      Uses company technical documentation and provides feedback for improvement. 

      Performs other duties as assigned. 

       

      Education 

      BS/MS major in Mechanical, Electrical/ Electro-optical, Controlling Engineering, Physics or other related fields 

       

      Experience 

      Fab experience in the Lithography area will be a plus 

      Experience or knowledge of semiconductor manufacturing process is preferred 

       

      Personal skills 

      Good communication skills and command of the English Language 

      Must be a strong team player, supporting & analytical skill and good working habits 

       

      Context of the position 

      At customer sites / office

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-10-20
    • 台灣艾司摩爾科技股份有限公司(ASML)
      新北市林口區面議(經常性薪資4萬含以上)經驗不拘大學以上

      Job Description 

      As a MFG PL you will prepare the factory for a smooth introduction of some of the most complex machines ever built – the YieldStar metrology product from ASML. But of course you won’t be alone; you will be the key interface between development engineering, manufacturing engineering and the factory floor. This typically means interfacing with teams in Asia, the Netherlands and the U.S. Your activities can broadly be divided into two types: pro-active preparation of the factory before the roll-out of new systems, and re-active trouble-shooting and damage control after. 

       

      Main Responsibilities 

       

      •Prepare the industrialization of all new YieldStar products, system and sensors, following ASML’s 6P=P process which covers Product, Procedures, People, Plant, Production Tools, and Parts. 

      •Prepare necessary documentation in order to pass each Key Decision gate check on time. (PGP 2011 process) 

      •Drive a large D&E (Development and Engineering) organization (10 to 30 separate projects per new product) towards a reliable and manufacturable system design 

      •Specify and secure the training needs to enable the manufacturing group to build the systems. 

      •Feedback knowledge to D&E to ensure system design improvement 

      •Deliver prototypes on time while documenting all the issues to be solved before ramp to volume production. 

      •Manage complete roll-out plan. 

      •Serve the Production Engineering team by making all of the new product requirements explicitly clear and then work with various competence owners to help them secure their deliverables on time 

      •Apply the same methodology not only to the Product, but also to Process introduction. For example, Intel CE compliance is both a product and a process. 

      •Work in Microsoft EPM system and serve as liaison to PMO group for any technical issues 

       

       

      Education 

      Master’s degree (or Bachelor + relevant experience) in physics, electronics or mechanical engineering. 

       

      Experience 

      Extensive project management experience (3-5 years) in a high-tech equipment industry. Preferably experience in the area of new product introduction or design. 

       

      Personal skills 

      The ability to influence without power across a global organization to make sure that issues land at the right desk and are committed to a timely solution 

      Structured, complete and multicultural communication without fear to speak up in front of unfamiliar audiences 

      Understanding of design and assembly and test processes to ensure that you are able to find the right person when you need in-depth expertise and you can validate plans 

      Expert planning capabilities to focus on the right level of detail and ensure resources are committed to keep the introduction plan on schedule 

      High level of personal flexibility to travel (up to ~15%) and frequently attend conference calls at inconvenient times (until ~11PM) to facilitate global connections 

      Determination to gather opinions within the manufacturing organization to ensure all voices are heard during the development and ramp up process. 

      Work independently and bring clarity to un-clear situations by applying a balance of knowledge, experience and instinct. 

       

      Context of the position 

      Reports directly to the YS Manufacturing Manager and is expected to participate as a member of the YS management team and provide service at peer level toward seven team leaders. Must be capable manage deliverables from engineers whom are not direct reports.

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-10-20
    • 日月光半導體製造股份有限公司
      台北市信義區月薪 40,000~70,000元經驗不拘大學,碩士千大企業

      We are looking for professionals to join our Strategic Marketing and Planning Department in Taipei worldwide headquarter. ASE Technology Holding (TAIEX: 3711, NYSE: ASX) is the world’s largest provider of semiconductor manufacturing services in IC assembly and test, and we have extended our presence in electronic manufacturing services through our subsidiary, USI. The position will have the great fast-track involvement in group strategic planning / business development and exposure to global technology dynamics and leading electronic and semiconductor companies. 

       

      Responsibilities: 

      - Conduct market analysis on electronic and semiconductor industry to help our group identify business opportunities 

      - Perform regular analysis for group operational & business performance and deliver insights to senior management 

      - Perform researches on potential M&A targets and partnership opportunities with execution plans 

      - Utilize effective communication and problem-solving skills to work closely with different departments within ASE Group to ensure company growth 

      - Collaborate with sales, engineering and manufacturing teams to assist strategic business decisions of senior management with our market intelligence 

       

      Qualifications: 

      - BS or MS of Electrical Engineering or equivalent. 

      - Strong analytical and problem-solving abilities 

      - Good written and verbal communication skills 

      - Native proficiency in Chinese/fluent in English speaking and writing


      要求條件

      工程學門 相關科系

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-10-20
    • 日月光半導體製造股份有限公司
      台北市信義區月薪 40,000~80,000元經驗不拘大學,碩士千大企業

      We are looking for professionals to join our Strategic Marketing and Planning Department in Taipei worldwide headquarter. ASE Technology Holding (TAIEX: 3711, NYSE: ASX) is the world’s largest provider of semiconductor manufacturing services in IC assembly and test, and we have extended our presence in electronic manufacturing services through our subsidiary, USI (SSE: 601231). The position will have the great fast-track involvement in group strategic planning / business development and exposure to global technology dynamics and leading electronic and semiconductor companies. 

       

      Responsibilities: 

      - Conduct market analysis on electronic and semiconductor industry to help our group identify business opportunities 

      - Perform regular analysis for group operational & business performance and deliver insights to senior management 

      - Perform researches on potential M&A targets and partnership opportunities with execution plans 

      - Utilize effective communication and problem-solving skills to work closely with different departments within ASE Group to ensure company growth 

      - Collaborate with sales, engineering and manufacturing teams to assist strategic business decisions of senior management with our market intelligence 

       

      Qualifications: 

      - BS/BA or MS/MBA in business administration, finance, or equivalent or BS or MS of Electrical Engineering or equivalent. 

      - Strong analytical and problem-solving abilities 

      - Good written and verbal communication skills 

      - Native proficiency in Chinese/fluent in English speaking and writing


      要求條件

      商業及管理學門,工程學門 相關科系

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-10-20
    • 南亞科技股份有限公司
      新北市泰山區面議(經常性薪資4萬/月含以上)經驗不拘大學,碩士千大企業

      1. 低功率行動型記憶體開發 

      2. 新測試覆蓋率程式開發 

      3. 新產品電性及物性除錯分析 

      『具工作經驗者,薪資另議』


      要求條件

      電機工程學類,電子工程學類,光電工程學類 相關科系

      ● 擁有 輕型機車,普通小型車,普通重機車 駕照

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-10-17
    • 南亞科技股份有限公司
      新北市泰山區月薪 43,000~57,000元經驗不拘碩士,博士千大企業

      1. 處理新產品開發驗證、除錯及測試。 

      2. 電子電路設計及韌體程式設計。 

      3. 操作測試設備,並評估元件、模組或系統的正確性和性能。 

      4. 與機電工程師和其他人員合作、鑑定、確認及解決相關研發的問題。 

      5. 提供電子方面的技術協助和解決方法。 

      6. 開發進度訂定、管理與產品規格書編寫。 

      7. 協助業務單位瞭解客戶需求。


      要求條件

      電機工程學類,電子工程學類,光電工程學類 相關科系

      展開收合此次搜尋不想看到這間公司
    • 更新時間:2020-10-17
  • 精選職缺
  • 企業預估回應您的時間為「1個工作天」(2~7天以此類推)
  • 此職務急徵人才
  • 企業實習職缺
  • 研發替代役職缺
  • 接受身障職缺
  • 職場新聞,企業有發布新聞稿,文章,活動等訊息
  • 溫馨職場,企業有提供職場環境及公司文化等簡介