AFE系統與IP驗證工程師

1.RF/mm-wave Device Characterization; Measurement, Data Analysis and Reporting. 

2.Device pcell design, test structure creation and tape out. 

3.Work with modeling & PDK team for design enablement, model validation and pcell improvement. 

4.Liaise with vendor, assist lab manager for measurement tool set up, calibration, maintain good measurement quality.

1.To be responsible for driving a leading edge process/device development and optimization of RFSOI devices in order to meet scaling, performance, reliability, and manufacturability requirements. 

2.To conduct device pcell design, test structure creation and tape out.  

3.To perform extensive process and device TCAD simulation using various techniques to optimize device performance and ensuring reliability.  

4.To perform device characterization and analysis with the aid of DC-IV bench test. 

5.To work with modeling & PDK team for design enablement, model validation and pcell improvement.

1.負責 LVS deck 撰寫 

2.Create LVS decks for unmatched cases 

3.學習驗証工具新技能 

4.負責 QA flow maintenance 以ensure LVS deck quality 

5.負責deck guideline 維護 以確保品質 與 知識管理

聘僱期間預計至2026/12月 

1.依SOP執行機台保養、SPC異常及機況排除，並記錄機台參數 

2.依SOP執行機台保養,零件組裝與校正 

3.依SOP排除機況 

4.依SOP 處理SPC相關異常 

5.協助工程師生產管理之運作 

6.彙整報表與重要機台參數紀錄

1.主被動光學元件，如調變器、檢測器、光波導、耦合器等之模擬與優化。 

2.執行矽光子元件的量測，包括光學特性(如插入損耗、反射、頻寬等)與電性測試，並支援光電協同驗證相關量測。 

3.分析量測數據，撰寫報告並提出設計優化建議。 

4.協助製程團隊進行元件製作流程規劃，並針對製程結果進行設計修正。 

5.使用相關軟體 (如Lumerical、COMSOL、Synopsys等)進行光學與電學模擬分析。

1.Spice model generation and verification for advanced and specialty technologies 

2.Spice Model Parameter Extraction 

3.Test key design 

4.Internal and external customer support 

5.Advanced modeling tools, extraction algorithms and model equation benchmarking

工作項目： 

1.協助Power/AFE IP功能與規格驗證，確保設計品質  

2.協助工程師FT產線開發平台與測試板更換事宜(需進無塵室)  

3.協助工程師討論並定義工程規格，參與產品規格制定流程  

4.協助部門儀器校驗  

5.具備焊接能力，能獨立更換IC  

應徵條件:  

1.大學以上學歷電機、電子、通訊、資訊等相關科系畢業  

2.熟悉電力電子、電源轉換器設計/ AFE(ADC, DAC, PLL)相關知識與驗證者為佳  

3.可接受無塵室工作者為佳  

4.會焊接IC和PCB Layout者為佳  

5.具C#或其它程式語言撰寫能力者為佳

1.RIE製程 

2.Laser decap 製程 

3.MIP製成 

4.ion milling製程

1.Has electrical failure analysis experience (C-AFM, I-V curve 等測試 

EMMI / InSB / OBIRCH / nano probing等機台操作經驗 

2.Strong analytical and problem-solving skills. 

3.有在 fab / lab / FA-house 尤佳 

4.Equipment installation and maintenance.