【臺南】TCP Probe Equipment Engineer

1. 系統巡檢抄表及設備運轉操作 

2. 執行能資源供應及化學品用量統計分析 

3. 執行例行日常設備維護/操作及作業環境6S 

4. 各單位反應事項應急處理 

5. 執行異常發生時系統的轉換機及收集三現資料 

6. 其他上級交辦事項

此角色需配合現場節奏與班別制度運作，適合能在穩定流程與清楚規範下，踏實執行並累積專業價值的人。 

1.FA可靠度實驗需求 

2.電性資料擷取 

3.RMA貨批數據收集 

4.ORT可靠度實驗需求 

4.週報/月報/季QBR資料彙整(TPM) 

5.執行展機作業(PDS) 

6.其他上級交辦事項

1.程式Remote與Shmoo/Pinmargin抓取，並確保其安全性 

2.PDM文件佈署 

3.驗收LB/PC/BI板 

4.暫扣批解析與處置 

5.Offline異常排除

此角色需配合現場節奏與班別制度運作，適合能在穩定流程與清楚規範下，踏實執行並累積專業價值的人。 

1.機台驗收，NPI-機台setup-部品更換確認 

2.依照規範執行保養(半年/年保養) 

3.執行機台Alarm Trouble Shooting處置 

4.同機型fine tune 

5.Fan out-改善展開 

6.機台電腦資安防護 

7.其他上級交辦事項

此角色需配合現場節奏與班別制度運作，適合能在穩定流程與清楚規範下，踏實執行並累積專業價值的人。 

1.依標準作業規範執行 Repeat改機 

2.依照標準作業規範,進行部品更換 

3.依照規範執行初階保養(日/周/月/季保養) 

4.設備機台鳴叫處置(RFC) &異常反應

1.規畫執行日常保養及年度歲修 

2.執行廠務設施修繕工作 

3.內外部稽核(安全.環保.消防.品質)資料管控及陪同 

4.年度保養長單評估及部品需量控管

As an Equipment Engineer, you will be responsible for overseeing the installation, modification, upgrade and maintenance of manufacturing equipment. Study equipment performance and reliability, and establish plan and solutions for equipment problems that affect the manufacturing process. Provide technical support to the manufacturing equipment repair. Define and record equipment maintenance schedules. 

Responsibilities and Tasks: 

1.Set up equipment maintenance guideline. 

2.Establish and improve equipment repair system. 

3. Management, improvement and cost reduction for machine parts. 

4.Equipment repair and abnormal condition handling. 

5.Enhance equipment capacity and performance. 

6.New machine evaluation and import. 

Preferred Experience: 

•A working knowledge of Microsoft Office products 

If you are interested in the job, please apply by Micron job link : https://micron.wd1.myworkdayjobs.com/zh-TW/External/job/Taichung––-Fab-16-Taiwan/Equipment-Engineer––SHIFT-_JR70103

1. 具備半導體設備相關現場服務裝機售服經驗。  

2. 工作內容： 

遵守各項安全規範確保職業安全及個人健康。 

Local scrubber 設備裝機及售後服務維修保養及記錄。  

機台設備巡檢及故障排除，維持機台正常運作。 

提供技術咨詢與支援，與客戶建立良好關係、有效處理客戶抱怨、維持良性溝通。 

3. 工作環境：半導體廠(有無塵室經驗者佳)。  

4. 配合輪值夜間/假日on call(提供值班津貼)，出勤另給加班費。 

5.內部作業: ISO,零件庫存掌控清點。 

6.處理主管交辦事項

Technical 

1. Responsible for providing quality repair and preventive maintenance service of company equipment at customer sites. May install or relocate customer equipment and perform associated start-up and check-out procedures under supervision 

2. Perform on-site preventive maintenance. Order and replace defective units, components or parts as appropriate.  

3.Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions.  

4. Determine corrective actions required and escalate for assistance and prompt resolution with the support of technically more experienced staff for assistance and guidance when assessing severity of malfunctions and determining corrective actions required. 

5. On the job Training (OJT) to assist with installing and start up and/or relocating equipment at customer’s site.  

6. Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials.  

7.Execute project action items under direct supervision 

8. Perform other related duties as assigned by senior FSE / supervisor 

Leadership 

1. May Provide on-site instruction to sub-contractors and customers 

Customer Relation  

1. Professionally represent the company to the customer. Be committed to customer satisfaction and develop good customer relations by maintaining standards of conduct acceptable to both Lam and customers. 

2.Shadow more experienced engineer at customer site

What we are looking for 

The service team at Nova is looking for a Service Engineer to provide product support at Nova customers. 

In this role you‘ll be joining the Global Service Group at Nova. We provide service to a large-scale install base, at leading semiconductor manufacturers worldwide. 

Responsible for training, installing, and supporting all Nova products at customer sites worldwide. 

We foster teamwork, excellence, and innovation, making customer success our main goal. 

What you will be doing 

• Implement the Customer Support Policy for the OEM End User. Supervise, maintain, and support company systems in the field. 

• Support OEM partners, and End Users internal service as defined under warranty and service support agreements. 

• Maintain, support, and guide proper training to all users, including OEM and End User personnel. (Training will be provided, in most cases, by an engineer dedicated to training). 

• Maintain proper reporting methods for all activities of customer support as defined by the Territory Service Manager/Customer Support Manager. 

• Maintain company’s parts inventory under the position’s control. Maintain proper level of stock in accordance with company spare parts tock policy, as set from time to time. 

• Assist in new equipment integration, “add-ons,” and upgrades. 

• Provide feedback to the headquarters based on experience gained with customers. 

• Support the customer beyond the defined working schedule as required.

此角色需配合現場節奏與班別制度運作，適合能在穩定流程與清楚規範下，踏實執行並累積專業價值的人。 

1. Yield sustain 

2. ERP 工單資訊維護 

3. 報告彙整與解析 

4. 其他上級交辦事項

此角色在關鍵工作內容上需承擔專業判斷與結果責任，適合能在清楚標準下持續精進、並為專業輸出負責的人。 

1.展機失敗調查 / 處置 

2.Process與M/C alarm調查 / 診斷 / 處置 

3.製程能力提升 Fan out (參數 / 機台 / Tooling)

1.執行異常貨批Remote需求 

2.暫扣電性報告製作 

3.執行客戶暫扣批處置指令 

4.Online異常排除 

5.其他上級交辦事項