【美商玻璃基板大廠】Mechanical & Automation Engineer/機械與自動化工程師~台中西屯/長期職務

1. 自行車車架與零件機構設計與開發 

2. 與供應商合作模具開發事宜 

3. 樣品測試與驗證 

4. 量產確認 

5. 其他相關工作

（年資滿一年即可依考核評估轉正職！） 

工作內容： 

1.協助工程師保養、裝修、測試機台 

2.機台清潔、零件更換及相關清潔機器之復歸作業 

3.協助工程師於無塵室現場作業所要幫忙的合理工作 

能配合平日、休日加班佳 (優於勞基法計算加班費!!) 

~需自備交通工具~ 

**好康福利** 

勞保/健保/6％勞退/免費團保(600萬意外+70萬壽險+5萬醫療)  

依勞基法給予特休 

獎金(依照工作表現考核，每3個月發放一次) 

四節禮金 

年終獎金1個月 

年度調薪 

年薪可上看16個月 

無經驗、無相關證照皆可投遞履歷 

或直接於下方〝我要應徵〞按一下!投遞您的履歷喔~~

☆另有日當6,000~14,000元（以出勤20天試算） 

☆租屋補助5,000元/月（符合規定者） 

☆管理加給10,000元以上（符合規定者） 

☆加班費另計 

☆出差皆提供交通住宿 

【工作內容】 

1.設備組裝安裝 

2.設備調機調整 

3.設備測試分析 

【設備種類】 

1.塗布設備 

2.洗淨設備

Key Responsibilities: 

• Conduct electrical design activities, including hardware selection, system structure design, and review of electrical schematic drawings. 

• Develop control software by defining software functional specifications and programming PLC, HMI, SCADA systems. 

• Participate in various projects, including capital expansion, new technology development, solution migration, and process control improvement. 

• Engage in all phases of the project lifecycle, from system design to installation, start up, training, and technology transfer. 

• Utilize advanced skills in PLC, HMI, SCADA, automation integration, and data transfer as required by each project. 

• Demonstrate fundamental knowledge and provide equipment control logic and flow. 

• Willingness to travel and provide weekend and shift coverage as needed for projects. 

Experiences/Education: 

• Bachelor’s degree or higher in Mechanical, Electrical, Automation Engineering, or a related engineering field. 

• In depth understanding of automation industrial processes, including design, 

fabrication, FAT, installation, quality control, hot debugs, and SAT. 

• Expertise in PLC, HMI, SCADA programming, device application, and equipment integration. 

Required Skills: 

• Strong understanding of electrical design practices, machine/motion control systems, electro mechanical systems, VFD and Servo programming, communication protocols, and practical application. 

• Ensure proactive safety measures for all equipment and processes, adhering to NEC, NFPA, and other relevant safety codes. 

• Experience in construction system structure in a plant network environment or ISA 95 architecture, including higher level communications protocols. 

• Ability to gain a fundamental understanding of process issues and utilize troubleshooting skills. 

• Proficiency in Microsoft Office software applications (Outlook, Word, Excel, PowerPoint, etc.). 

• Strictly follow safety procedures and ensure awareness, such as Lock Out Tag Out. 

【薪資福利】 

*月薪$80,000~$122,000 (依學經歷核薪) 

*福利:勞健保/勞退提撥/免費團保/餐費補助 

*優於勞基法特休/全薪病假：到職即享有特休10天(未滿一年依比例)、全薪病假12天 

*不放假紀念日(例-教師節/行憲紀念日/國父誕辰…等)給予彈性假7天 

*享三節禮品/尾牙聚餐/新進員工勞工體檢補助/免費年度健檢/年度流感疫苗補助 

【此職缺為派遣職，長期職務，派遣合約一年一簽，依工作狀況續約】

【工作內容】 

•依據工程圖、電路圖和技術圖面進行設備組裝。 

•操作各種手工具與電動工具（如砂輪機、鋸子、電鑽等）進行零件加工與測試平台組裝。 

•使用量測工具（例如游標卡尺、千分尺、規）確保加工精度。 

•維持工作區域整潔有序。 

•與團隊合作，確保工作流程順暢並如期完成任務。 

•遵守所有安全規定與內部資訊安全流程，維持安全的工作環境。 

•定期對機械與設備進行保養與簡易故障排除。 

•在執行專案時保留紀錄，並主動回報任何異常或問題。 

•協助各種產線上或測試階段的專案試產 

•提出改善建議或方案 

【學經歷】 

•大學以上機械相關科系畢，無相關經驗可。若非相關科系者，需具備設備組裝經驗，能夠看工程圖組裝設備。 

•溝通能力良好，樂於團隊合作 

【薪資福利】 

*月薪$73,000~$100,000 (依學經歷核薪) 

*福利:勞健保/勞退提撥/免費團保/餐費補助 

*享三節禮品/尾牙聚餐/新進員工勞工體檢補助/免費年度健檢/年度流感疫苗補助 

【此職缺為派遣職，長期職務，合約一年一簽，並提供轉正職機會】

Purpose of the Position: 

The main role supports Corning’s Manufacturing, Technology, and Engineering (MT&E) corporate engineering directorate based in Asia. This position provides support to all Corning Incorporated manufacturing plants in the Asia-Pacific region. Project assignments may require extensive travel, up to 75％, to countries such as Japan, South Korea, India, and the USA. 

Project involved with: 

The project will focus on implementing robust, cost-effective automation and process machine systems in Corning’s manufacturing plants. This will require collaboration with manufacturing, control systems, process engineering, and other related departments. 

Day to Day Responsibilities: 

▪Responsible for ensuring the accuracy of work performed and takes a proactive approach to maintain high quality. 

▪Capable of working independently to develop process equipment design concepts and detail mechanisms in response to manufacturing issues or problems. 

▪Clearly and professionally communicate ideas and project status through graphic and written media, as well as oral presentations. 

▪Provide necessary documentation for activities, results, and assignments. 

▪Direct vendors in constructing prototype and production equipment. Conduct tests and evaluate data to make preliminary recommendations regarding equipment performance. 

【薪資福利】 

*月薪$70,000~$100,000 (依學經歷核薪) 

*福利:勞健保/勞退提撥/免費團保/餐費補助 

*享三節禮品/尾牙聚餐/新進員工勞工體檢補助/免費年度健檢/年度流感疫苗補助 

【此職缺為派遣職，派遣合約一年一簽】

【工作內容】 

•依據工程圖、電路圖和技術圖面進行設備組裝。 

•操作各種手工具與電動工具（如砂輪機、鋸子、電鑽等）進行零件加工與測試平台組裝。 

•使用量測工具（例如游標卡尺、千分尺、規）確保加工精度。 

•維持工作區域整潔有序。 

•與團隊合作，確保工作流程順暢並如期完成任務。 

•遵守所有安全規定與內部資訊安全流程，維持安全的工作環境。 

•定期對機械與設備進行保養與簡易故障排除。 

•在執行專案時保留紀錄，並主動回報任何異常或問題。 

•協助各種產線上或測試階段的專案試產 

【學經歷】 

•學歷要求：高中職以上，機械相關科系為優先。 

•工作經驗：設備組裝經驗，能夠看工程圖組裝設備。 

•熟練使用量測工具、各種加工用手工具與電動工具 

•溝通能力良好，樂於團隊合作 

【薪資福利】 

*月薪$60,000~$87,000 (依學經歷核薪) 

*福利:勞健保/勞退提撥/免費團保/餐費補助 

*享三節禮品/尾牙聚餐/新進員工勞工體檢補助/免費年度健檢/年度流感疫苗補助 

【此職缺為派遣職，長期職務，合約一年一簽】

Position Description 

•Process Equipment installation and startup project support 

•Vender Management for the process equipment installation and startup 

•Project scope developing work support with the requirement investigation and study. 

•Working with the project leader to manage cost/schedule/scope. 

•Managing progress, milestone and status of the project, plant issues, and resources 

•Understanding of mechanical design and drawings. 

•Equipment related troubleshooting, problem analysis and technical solution. 

Requirements 

•Mechanical Engineering or Technology related academic background. 

•5-10 years of the process equipment installation and startup project experience. 

•Mechanical Design and Scope Development experience 

•A good communication skill as a part of the extended functional project team. 

•Process Equipment Design/Installation Vender management skill. 

•CAD and general office software skill including MSCAD and general office software skill including MS––Word, MSWord, MS––Excel, MSExcel, MS––PowerPointPowerPoint 

•English communication skill is plus.English communication skill is plus. 

【薪資福利】 

*月薪$80,000~$160,000 (依學經歷核薪) 

*福利:勞健保/勞退提撥/免費團保/餐費補助 

*優於勞基法特休/全薪病假：到職即享有特休10天(未滿一年依比例)、全薪病假12天 

*不放假紀念日(例-教師節/行憲紀念日/國父誕辰…等)給予彈性假7天 

*享三節禮品/尾牙聚餐/新進員工勞工體檢補助/免費年度健檢/年度流感疫苗補助 

【此職缺為派遣職，派遣合約一年一簽，依工作狀況續約】

Day to Day Responsibilities: 

▪Time and motion study. 

▪Discrete event simulation and modeling with statistics knowledge base. 

▪Conduct time and motion observation study on the production lines for various line performance related study. 

▪Process mapping and understanding for discrete event simulation modeling. Identify data source, and define data requirements to be ready for modeling. Develop simulation model through configurations or coding as required. Interpret model output to address to the questions to be answered and provide recommendations. 

▪Identify right approach in optimization methodology to solve complex network logistics and manufacturing problems, including data collection, model building, solving and reporting out. Interpret output to provide recommendations to meet objective. 

▪Build data flow and analysis data using ML algorithms 

▪Communicate and participate in technical information sharing and foster discussion on new methodologies in solving operational problems. 

Project involved with: 

▪Communication with multiple stake holders such as manufacturing and engineering teams. 

Education & Experience 

▪Bachelor’s degree and above in Industrial & Operations Research or Manufacturing engineering or related field of study. 

Required Skills 

▪Previous ILE internship or industry project experience. 

▪Hands-on experience on discrete event simulation modeling and analysis (FlexSim, ARENA, or other simulation commercial software). 

▪Fundamental industrial engineering understanding and knowledge (ie. Time and motion study, factory physics, production performance metrics definition and calculation …etc). 

▪Knowledge or experience in capacity planning & analysis in manufacturing environment. 

▪Knowledge in statistics and use of data analysis tool such as Python, R, SAS, SPSS or Minitab. 

▪Able to understand CAD drawings. 

Desired Skills 

▪Hands-on experience on linear programming, integer programming and network optimization. Capability in developing AIMMS, CPLEX or related optimization models. 

▪Experience in digitalization using Python and other ML packages. 

▪Facility layout design with hands-on CAD development experience. 

【薪資福利】 

*月薪$70,000~$100,000 (依學經歷核薪) 

*福利:勞健保/勞退提撥/免費團保/餐費補助 

*享三節禮品/尾牙聚餐/新進員工勞工體檢補助/免費年度健檢/年度流感疫苗補助 

【此職缺為派遣職，派遣合約一年一簽，依工作狀況延約】

1.檢修caterpillar機械設備及保養 (包括施工機具、船用和工業用引擎及發電機)。 

2.土方設備(挖土機、壓路機、鏟車等)及電力系統組件之故障排除。 

3.機械設備零件維修。 

4.維修工具管理及維護。 

5.製作及管理維修文件報表。 

6.保持工作區域乾淨整潔。 

7.其他主管交辦事項。 

具備汽修科或是有大型機具維修經驗尤佳

*公司介紹: 

外商公司已有165年歷史 於1971年進入台灣,為第一家在台灣設立LCD玻璃基板工廠並製造的供應商，在台中中部科學園區和台南科學園區建立了最現代、最高效率的生產工廠,提供市場領先技術製造高品質LCD玻璃基板. 

工作內容 

1.機械設備組裝 

*不需要輪班、不用進無塵室  

具備條件 

1.具備識圖能力 2D & 3D (AutoCad/ Solidwork) 

2.機械安裝經驗 

3.基本英文聽力

*公司介紹: 外商公司已有165年歷史 於1971年進入台灣,為第一家在台灣設立LCD玻璃基板工廠並製造的供應商，在台南科學園區和台中中部科學園區建立了最現代、最高效率的生產工廠,提供市場領先技術製造高品質LCD玻璃基板. 

*我們正在尋找一個高度稱職的Modeling Simulation Development Engineer,未來您所會參與的工作內容如下 : 

Scope of Position and Day to Day Responsibilities: 

• Use knowledge of physics to build deep understanding of the materials and processes at CDT 

• Use existing tools and develop new analytical and numerical models to resolve process problems 

• Correlate simulation with experimental results 

• Support development and validation testing 

• Communicate results both orally and in written form of English 

• Protect Corning’s intellectual property by filing invention disclosures for patent application in timely fashion 

• Document all project findings in internal technical reports 

Required Skills: 

• Experience of using or programming in any one of the commercial software like ABAQUS, NASTRAN, ANSYS or DYNA3D 

• Strong foundation in physics and engineering science with programming skills 

• Sold Mechanics fundamental 

• Capability to design and plan the verification experiment for modeling 

• Creative/innovative problem solving via scientific or engineering methods 

• Results oriented and high commitment /energy 

• Sold Mechanics fundamental or computational fluid dynamics 

參與實驗設計、計畫、執行 

負責模擬分析 

使用電腦及專業軟體進行模擬，校正設定條件，讓模擬接近真實情境 

擅長使用工具:ABAQUS、C++、Java、Python、Pro/E 

面試流程：一次面試，以視訊方式進行，一周內會得知結果

工作內容: 

1.協助實驗室執行專案工作 

2.機構設計(實驗用途塗佈設備的機械跟設備的設計與組裝 )  

3. 3D ( AutoCAD )

*公司介紹: 外商公司已有165年歷史 於1971年進入台灣,為第一家在台灣設立LCD玻璃基板工廠並製造的供應商，在台南科學園區和台中中部科學園區建立了最現代、最高效率的生產工廠,提供市場領先技術製造高品質LCD玻璃基板. 

*我們正在尋找一個高度稱職的Process Engineer,未來您所會參與的工作內容如下 : 

工作介紹: 

1.具備統計分析基礎 (EX: Q7/Six Sigma/ DMAIC方法) 

2.主要蒐集實驗數據並做交叉比對及迴歸分析,判斷結論 

3.實驗前期需參與實驗設計 ex.設備參數的設定 

4.實驗中期需在實驗現場支援 

5.參與實踐設計&計畫&執行 

6. 執行階段會有offline測試及上線後測試 

7. 蒐集測試資料進行圖表分析 (使用Excel & JMP) 

8.新鮮人公司提供完整培訓 

人選條件： 

1. 碩士以上，電機電子/化學/光電科技 等相關科系畢業(可接受社會新鮮人) 

2. 英文能力：TOEIC 700或是同等之能力 

面試流程：一次面試，以視訊方式進行，一周內會得知結果

要工作內容為設備安裝、專案控管。 

需求條件:  

1.機械、輪機、航太工程、電機相關  

2.工程製造設計，機構設計圖 2D & 3D (AutoCad/ Solidwork)，相關工作經驗3-5年  

3.英文能力， 聽說讀寫中上程度(可英文線上會議)  

4.大學以上學歷  

5.具備機械安裝經驗  

6.衝突解決協調，解決問題臨場反應  

7.專案初期需要配合輪班約2-3周 

8.可配合國內出差 (台南40-60％)